Shenzhen Zhichuang Technology CO. Ltd. V66 Manuale Utente
When being used for the first time, it is necessary to connect APP for
alignment. After successful connection, wristband will self-synchronize
time, or otherwise, step calculation and sleep data won't be accurate.
alignment. After successful connection, wristband will self-synchronize
time, or otherwise, step calculation and sleep data won't be accurate.
Component Description
How to wear correctly
Best wear the wristband behind
malleolus ulnaris;
Adjust the size suitable for the
size of wrists via Adjustment Hole;
Fasten wrist strap buttons;
Sensor shall be close to skin avoiding moving.
Left Hand
Malleolusulnaris
Sensor
Please ensure that the electric quantity is normal in wristband. If the
wristband cannot start up normally with low battery, please connect
with charger to charge the device and the wristband will
automatically start up.
wristband cannot start up normally with low battery, please connect
with charger to charge the device and the wristband will
automatically start up.
Open mobile phone APP
Click to set up icons
↓
My device (iOS)/ search
equipmen(Android)
↓
Pull down scanning equipment
↓
Click device attachment
Sports bracelet V66
User Guide
Device requirement: iOS8.0 and above; Android 4.4 and above to support
bluetooth 4.0.
bluetooth 4.0.
GooglePlay
iOS
Introduction and wearing of smart wristband
Start to use wristband
Device attachment
ScanthefollowingQRcodesorenterintovariouslarge
applicationmarketstodownloadandinstall“flagfit”.
applicationmarketstodownloadandinstall“flagfit”.
How to install wristhand APP
Common problems
Adjustment Hole
Display screen
Wrist strap
Wristband charging
Start up/shut down
① IWhen the device shuts down, touch the function button for a long
time period of above 3 seconds to shake the device and start up.
time period of above 3 seconds to shake the device and start up.
② When the device starts up, switch to the shutdown interface and touch
the function button for a long time period of above 3 seconds to enter
into the shutdown interface. After touching for a short period of time and
choosing “Off”, touch for a long time period again to shut down.
the function button for a long time period of above 3 seconds to enter
into the shutdown interface. After touching for a short period of time and
choosing “Off”, touch for a long time period again to shut down.
How to operate wristband
① When the device starts up, to touch function keys for a short time period
can lighten screen or switch over display;
can lighten screen or switch over display;
② The screen shall be turned off without operation and users can connect
the mobile phone APP to revise off-screen time;
the mobile phone APP to revise off-screen time;
③ Switch to the heart rate and blood pressure interfaces to be tested
automatically and leave the heart rate and blood pressure interfaces to stop
tests.
automatically and leave the heart rate and blood pressure interfaces to stop
tests.
Promoting function
For promoting function, a promoting switch shall be switched on in APP-
end Setting Center, mobile phone and wristband shall be kept to be
connected successfully and there will be vibrating reminders when there
are messages.
end Setting Center, mobile phone and wristband shall be kept to be
connected successfully and there will be vibrating reminders when there
are messages.
Calling Short message QQ We-Chat Alarm clock Sitting
We-Chat reminder: in connection status, if the We-Chat reminder
function is turned on, when there is a We-Chat message coming, the
wristband will vibrate and display the We-Chat icon reminder.
function is turned on, when there is a We-Chat message coming, the
wristband will vibrate and display the We-Chat icon reminder.
Smart alarm clock: three alarm clocks can be set up in connection
status and after setting up, the wristband will be synchronized; the
smart alarm clock is a silent alarm clock. When there is an alarm, the
wristband will moderately vibrate to support off-line alarm clock
reminder.
status and after setting up, the wristband will be synchronized; the
smart alarm clock is a silent alarm clock. When there is an alarm, the
wristband will moderately vibrate to support off-line alarm clock
reminder.
Sitting reminder: set up whether to open sitting reminder function and
reminder time interval and the default time interval is one hour; in
connection status, after turning on, if the user doesn't take exercise
within one hour, the wristband will vibrate and remind the user to take
exercise.
reminder time interval and the default time interval is one hour; in
connection status, after turning on, if the user doesn't take exercise
within one hour, the wristband will vibrate and remind the user to take
exercise.
Main functions
Time model: no bluebooth icon on the interface means no connection
between wristband and mobile phone. The bluebooth icon means
successful connection; after the wristband is matched and well connected
with APP for the first time, the wristband will synchronize time and date on
mobile phone.
between wristband and mobile phone. The bluebooth icon means
successful connection; after the wristband is matched and well connected
with APP for the first time, the wristband will synchronize time and date on
mobile phone.
Date
Time
Electricity volume
Connection status
Icon
Unit
Exercise step number
Exercise step number
Icon
Systolic pressure
Diastolic pressure
Unit
Warm prompt for heart rate/ blood pressure test: when being tested,
icons will jump and meanwhile the heart rate LED light will be lighted
on the back of wristband; when testing, the sensor shall be close to
the skin, extraneous light shall be avoided from influencing the
accuracy of test; test regions shall be kept clean and both sweat and
blot will influence test results.
icons will jump and meanwhile the heart rate LED light will be lighted
on the back of wristband; when testing, the sensor shall be close to
the skin, extraneous light shall be avoided from influencing the
accuracy of test; test regions shall be kept clean and both sweat and
blot will influence test results.
Other functions
APP functions and setting
Personal information and exercise goals
After entering into APP, please first set up
personal information.
personal information.
Setting →Personal setting
Head portrait, gender, age, height and weight
can be set up and personal information can
enhance accuracy of data.
can be set up and personal information can
enhance accuracy of data.
Customize personal everyday exercise goals. A
reasonable exercise plan is helpful for
promoting body quality.
reasonable exercise plan is helpful for
promoting body quality.
Charging pattern:
While charging, clip the charging clip on
the host of the wristband and the contacts
of the charging clip shall be aligned with
the contacts of the host. (as shown in the
figure)
Bluebooth connection: after successfully matching, APP will
automatically save the wristband bluebooth address. When APP is
opened or operated in background, it will automatically search and
link with the wristband.
automatically save the wristband bluebooth address. When APP is
opened or operated in background, it will automatically search and
link with the wristband.
Data Synchronism: manually pull down synchronous data on APP
homepage;The wristband can save offline data for 7 days. The larger
homepage;The wristband can save offline data for 7 days. The larger
Calling reminder: in connection status, if the calling reminder function
is turned on, when there is a call, the wristband will vibrate and display
the name or telephone number of call. (If the caller's name has been
saved in the mobile phone address book, display the name or
otherwise display the phone number)
is turned on, when there is a call, the wristband will vibrate and display
the name or telephone number of call. (If the caller's name has been
saved in the mobile phone address book, display the name or
otherwise display the phone number)
Short message reminder: if the short message is from a contact in
address book, display the name and if the short message is from a
strange, display the phone number.
address book, display the name and if the short message is from a
strange, display the phone number.
QQ reminder: in connection status, if the QQ reminder function is
turned on, when there is a QQ message coming, the wristband will
vibrate and display the QQ icon reminder.
turned on, when there is a QQ message coming, the wristband will
vibrate and display the QQ icon reminder.
Step-counting model: display step count and wristband-defaulted
step-counting model. Wear the wristband on the wrist. When a user
walks and his or her arms swing, the wristband will record walking
step data according to the number of times to swing.
step-counting model. Wear the wristband on the wrist. When a user
walks and his or her arms swing, the wristband will record walking
step data according to the number of times to swing.
Icon
Unit
Exercise distance
Exercise distance
Distance model: Calculate walking distance according to the number
of walking steps and height set up personally on APP.
of walking steps and height set up personally on APP.
Icon
Unit
Calorie consumption
Calorie consumption
Calorie model: Calculate calorie consumption according to the number of
walking steps and height and weight set up personally on APP.
walking steps and height and weight set up personally on APP.
Heart rate detection model: on the heart rate monitoring interface,
automatically enter into heart rate detection model and support
dynamic real-time heart rate detection. Under the heart rate detection
model, time of endurance in the wristband will reduce.
automatically enter into heart rate detection model and support
dynamic real-time heart rate detection. Under the heart rate detection
model, time of endurance in the wristband will reduce.
Heart rate icon
Blood oxygen icon
Numerical value
of blood oxygen
of blood oxygen
Numerical value
of heart rate
of heart rate
1 Please wear the wristband on the wrist and 2CM from inside of ulna joints.
2 While measuring heart rate, the heart rate sensor shall be close to skin and
well touched. If wearing quite loosely, the sensor will expose the lightray and
measured values will be inaccurate. (Please don't look at the green ray of the
sensor directly. That may cause eye discomfort.)
well touched. If wearing quite loosely, the sensor will expose the lightray and
measured values will be inaccurate. (Please don't look at the green ray of the
sensor directly. That may cause eye discomfort.)
3 Though the product is in real-time and dynamic detection for heart rate,
but please keep the body stopping exercise when detecting heart rate and
sit silently for measurement, or else the time to measure heart rate will be
lengthened or data cannot be measured. After the wristband measures data
and then take exercise, the real-time dynamic heart rate data can be
checked.
but please keep the body stopping exercise when detecting heart rate and
sit silently for measurement, or else the time to measure heart rate will be
lengthened or data cannot be measured. After the wristband measures data
and then take exercise, the real-time dynamic heart rate data can be
checked.
4 If the measure data have a large difference, please have a rest and
measure again. The average value gained after measuring continuously for
5 times will be relatively accurate.
measure again. The average value gained after measuring continuously for
5 times will be relatively accurate.
5 The product is for real-time dynamic heart rate measurement, so the heart
rate will be different when speaking, having a meal, drinking wine or in other
states. Please take the actual values as the criterion.
rate will be different when speaking, having a meal, drinking wine or in other
states. Please take the actual values as the criterion.
6 In the measurement, ensure that there is no smudge at the bottom of
heart rate sensor, and skin color, hair density, tattoo, and scars may
influence detection results.
heart rate sensor, and skin color, hair density, tattoo, and scars may
influence detection results.
Blood pressure detection model: switch to the blood pressure
interface to start to test blood pressure and switch to the next interface
to stop test; when starting to test but there is no result to be tested,
display the result of test for the last time or '-'; mobile phone App can
be also connected to conduct tests on blood pressure interface. Test
methods and matters needing attention are the same as heart rate
detection matters.
interface to start to test blood pressure and switch to the next interface
to stop test; when starting to test but there is no result to be tested,
display the result of test for the last time or '-'; mobile phone App can
be also connected to conduct tests on blood pressure interface. Test
methods and matters needing attention are the same as heart rate
detection matters.
Sleep model: when falling asleep, the wristband will automatically judge and
enter into sleep monitoring model, automatically detect your deep sleep/
light sleep/ sober duration in a whole night, and calculate your sleeping
quality; sleep data temporarily only support APP-end checking.
enter into sleep monitoring model, automatically detect your deep sleep/
light sleep/ sober duration in a whole night, and calculate your sleeping
quality; sleep data temporarily only support APP-end checking.
Note: there will be sleep data only if falling asleep while wearing a wristband.
More APP reminder: More APP reminder can be added but only some
types are supported currently.
types are supported currently.
Smart anti-lost: In connection status, it will alarm if the mobile phone is
beyond a certain range. When an Android user is using this function,
the 'GloryFit' shall be allowed to display floating window.
beyond a certain range. When an Android user is using this function,
the 'GloryFit' shall be allowed to display floating window.
Look for wristband: In connection status, click the option “look for
wristband” and the wristband will vibrate.
wristband” and the wristband will vibrate.
Shake-it-off photographing: After entering shake-it-off photographing
interface in connection status, the user can shake the wristband off to
photograph after counting down for 3 seconds.
interface in connection status, the user can shake the wristband off to
photograph after counting down for 3 seconds.
Firmware upgrading:
It is used to detect whether there is a new edition
for the wristband firmware; in the upgrading process, there need to be
2-3 minutes tocomplete upgrading and during the time, Bluetooth devices shall
be avoided from being disconnected.
2-3 minutes tocomplete upgrading and during the time, Bluetooth devices shall
be avoided from being disconnected.
Restore factory settings: Data of wristband and APP will be all zero-cleared
and restart APP.
and restart APP.
Why wait for 8 seconds to test heart rate?
Testing heart rate requires a long signal to calculate your heart rate
accurately.
Testing heart rate requires a long signal to calculate your heart rate
accurately.
What if Bluetooth cannot be connected? (connection/reconnection
failure or slow connection/reconnection)
Confirm whether to support cell phones or tablets with IOS8.0,
Android system version 4.4, and Bluetooth 4.0.
1. Due to the presence of signal interference in the Bluetooth wireless
failure or slow connection/reconnection)
Confirm whether to support cell phones or tablets with IOS8.0,
Android system version 4.4, and Bluetooth 4.0.
1. Due to the presence of signal interference in the Bluetooth wireless
4. It charges with 5V500MA, do not use overvoltage load power
source, to cause hardware damage.
source, to cause hardware damage.
5. No throwing it into the fire for fear of explosion.
6. Environment temperature: 0 degrees to 45 degrees; charging
temperature: 0 degrees to 45 degrees.
temperature: 0 degrees to 45 degrees.
7. The wristband's battery is built-in and not removable; please do
not try to change the battery.
not try to change the battery.
8. When you wear, please note that if you have sensitive skin, or wear
it too tightly, you may feel uncomfortable.
it too tightly, you may feel uncomfortable.
9. Please wipe sweat drops on your body and wrist in time. If the
wristband touches soap, sweat, allergen, or contamination for a long
time, it may cause skin allergy and itch.
wristband touches soap, sweat, allergen, or contamination for a long
time, it may cause skin allergy and itch.
10. Please wipe the water wristband before charging operation;
otherwise it will lead to the charging fault and contact corrosion of
charging point.
otherwise it will lead to the charging fault and contact corrosion of
charging point.
11. In a strongly electrostatic environment, the wristband may
malfunction, such as no display or display of abnormalities. Please do
not use it in high pressure and high magnetic environment to avoid
electrostatic interference.
malfunction, such as no display or display of abnormalities. Please do
not use it in high pressure and high magnetic environment to avoid
electrostatic interference.
12. Do not wear the wristband when bathing.
Unable to search the ring?
Since the wristband is not searched by phone in Bluetooth broadcast,
make sure the wristband is in power and activated and is not
connected to any other phones. Then, put the wristband close to the
phone, if it is still invalid, turn off the phone, and after about 20
seconds, restart the phone Bluetooth
Since the wristband is not searched by phone in Bluetooth broadcast,
make sure the wristband is in power and activated and is not
connected to any other phones. Then, put the wristband close to the
phone, if it is still invalid, turn off the phone, and after about 20
seconds, restart the phone Bluetooth
Why the wristband should be worn more tightly when measuring heart
rate?
The wristband uses light reflection principle, penetrates the skin
through the light source, and collects the signal reflected to the
sensor, to calculate your heart rate. If you don't wear it tightly, there
will be ambient light reaching into the sensor, which will affect
measurement accuracy.
rate?
The wristband uses light reflection principle, penetrates the skin
through the light source, and collects the signal reflected to the
sensor, to calculate your heart rate. If you don't wear it tightly, there
will be ambient light reaching into the sensor, which will affect
measurement accuracy.
Why not remind when opening the reminder function?
Android phone: confirm that the phone and the wristband are
connected, and open the corresponding permissions in the
phone settings, allowing the "flagFit" APP access calls, messages
and address book, and keeping "flagFit" running in the
background; if the phone is installed with security software, add
"flagFit" to "trust".Iphone: If there is no reminder after the
Android phone: confirm that the phone and the wristband are
connected, and open the corresponding permissions in the
phone settings, allowing the "flagFit" APP access calls, messages
and address book, and keeping "flagFit" running in the
background; if the phone is installed with security software, add
"flagFit" to "trust".Iphone: If there is no reminder after the
Notice of use
1. The wristband theoretically supports phones or tablets with IOS 8.0
and above and Android 4.4 and above and with Bluetooth 4.0, but not
supports all mobile devices, please specify the actual conditions.
and above and Android 4.4 and above and with Bluetooth 4.0, but not
supports all mobile devices, please specify the actual conditions.
2. This product is made of precision parts, please do not drop this
product and hit it with hard objects, otherwise it will scratch the surface
of the machine and damage hardware.
product and hit it with hard objects, otherwise it will scratch the surface
of the machine and damage hardware.
3. Please do not disassemble or rebuild it, otherwise it will cause
problems or hinder product's quality guarantee.
problems or hinder product's quality guarantee.
Maintenance
Clean sensors and connecting interfaces with mild soap and water. If
frequently used, it is recommended to clean the ristbandevery week.
frequently used, it is recommended to clean the ristbandevery week.
the data size is, the longer the synchronization time is. The longest
time is about 2 minutes. There will be a prompt of “synchronically
accomplished” after accomplishment.
time is about 2 minutes. There will be a prompt of “synchronically
accomplished” after accomplishment.
7 The heart rate detection device is based on PPG measurement principle,
so its accuracy may be different due to physiological factors influenced by
absorption and reflection of ray of light (blood circulation, blood pressure,
skin condition and vessel position and density, etc.) If the measurement
value is inaccurate when measuring heart rate maximum and minimum,
please measure once again.
absorption and reflection of ray of light (blood circulation, blood pressure,
skin condition and vessel position and density, etc.) If the measurement
value is inaccurate when measuring heart rate maximum and minimum,
please measure once again.
8 The long-time measurement may cause fever. If there is discomfort,
please remove it and wear it after the device is cooled down.
please remove it and wear it after the device is cooled down.
9 The cold weather will influence your measurement results and measure
under the circumstance of keeping warm.
under the circumstance of keeping warm.
connection, it is possible that the time of each connection is different. If it
is not connected for a long time, make sure that the operation is
performed without magnetic field or without Bluetooth interference.
2. Turn off Bluetooth and then turn it on.
3. Turn off the phone's background application or restart your cell
phone
4. Don't connect to other Bluetooth devices or functions
simultaneously.
5. Does the APP work properly in the background? If it does not in
the background, it probably won't connect.
is not connected for a long time, make sure that the operation is
performed without magnetic field or without Bluetooth interference.
2. Turn off Bluetooth and then turn it on.
3. Turn off the phone's background application or restart your cell
phone
4. Don't connect to other Bluetooth devices or functions
simultaneously.
5. Does the APP work properly in the background? If it does not in
the background, it probably won't connect.
connection, it is recommended to restart the phone to reconnect, when
reconnecting the wristband again, there will be reminder after popping up
“Bluetooth pairing request” and clicking “Pairing”.
reconnecting the wristband again, there will be reminder after popping up
“Bluetooth pairing request” and clicking “Pairing”.
Whether the wristband is waterproof or not?
The wristband is designed with waterproof seal and waterproof level
reaches up to IP67. It can be used when you wash your face and hands.
IP67 standard is 30 minutes with less than 35 degrees in less than 1 meter
deep.
The wristband is designed with waterproof seal and waterproof level
reaches up to IP67. It can be used when you wash your face and hands.
IP67 standard is 30 minutes with less than 35 degrees in less than 1 meter
deep.
Does Bluetooth connection need to be open all the time? If turn it off, is
there any data?
Before synchronizing data, movement and sleep data are reserved on the
wristband host. When the connection between the phone and Bluetooth
on the wristband is successful, the wristband data will automatically be
uploaded to the phone, so pay attention to synchronize data to your
phone every day.
Notice: if the reminding functions of calls and messages are turned on, you
must keep Bluetooth in connection status. Alarm clock supports offline.
there any data?
Before synchronizing data, movement and sleep data are reserved on the
wristband host. When the connection between the phone and Bluetooth
on the wristband is successful, the wristband data will automatically be
uploaded to the phone, so pay attention to synchronize data to your
phone every day.
Notice: if the reminding functions of calls and messages are turned on, you
must keep Bluetooth in connection status. Alarm clock supports offline.
Don't scratch the sensor to protect it from damage.
It is necessary to wipe the ristbandwith a damp cloth. seild soap to
remove grease dirt or dust.
remove grease dirt or dust.
Do not expose he wristbandto strong chemicals such as gasoline,
cleaning solvents, propanol, alcohol, or insect repellant.hemicals can
damage the tightness, shell, and surface of it.
cleaning solvents, propanol, alcohol, or insect repellant.hemicals can
damage the tightness, shell, and surface of it.
After swimming, clear your istbandwith tapwater and wipe it
with a soft cloth to keep it dry.
with a soft cloth to keep it dry.
Avoid strong impact, extreme heat, and exposure to your
wristband.
wristband.
It is waterproof when the lensand the shell are intact Violent
demolition or impact may lead to waterproof failure.
demolition or impact may lead to waterproof failure.
Basic parameter
Type Smart wristband
Display screen 0.66 cun OLED
Weight 25g
Length 25.5cm
Waterproof level Ip67
Material Silica gel
Battery type Li-polymer
Battery model 401119
Battery capacity 90mAh
Battery voltage 3.7V
Battery power 0.333Wh
Host, Charging
Packing list c lamp and
instructions
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation。
FCC Statement