HolidayCoro HCELFM Manuale Utente
EasyLights.com
HolidayCoro.com Part Number 931
FM-Audio Board User’s Manual V2.0
Revised August 9, 2018
FCC ID: 2ANC4HCELFM
Installation and Instructions
Changes or modifications not expressly approved by EasyLights could
void the user's authority to operate the equipment.
void the user's authority to operate the equipment.
Your FM-Audio board connects to an EasyLights controller via a 10 pin ribbon cable. The
picture below illustrates the FM-Audio board connected to an EasyLights Pix16 controller.
You must connect the cable properly or you may damage the FM-Audio board or the controller
board.
The RED wire in the cable indicates the position of PIN #1.
With Power OFF to the controller board, please do the following:
Insert one of the connectors on the ribbon cable into the FM-Audio so that the RED wire on the
cable is positioned at “Pin #1 – Colored Wire” label on the board.
Position the other connector of the ribbon cable so that the RED wire is also located by PIN #1
on the controller board.
Please see the picture below for clarification.
To set the FM channel that your audio will broadcast on, please visit EasyLights.com and log
into your account.