Hangzhou Rock Machinery Manufacture Co. Ltd. FEWL2-1 Manuale Utente
WIRELESS REMOTE CONTROL for ROCK ELECTRIC WINCH
* Wireless Remote Control Operation Steps:
1. Disconnect power to the winch.
2. Mount Wireless Remote Control Receiver on to the vehicle properly.
3. Plug Wireless Remote Control Receiver in the Solenoid Assembly. Make
sure Plug and Socket are in correct type(Fig.1).
sure Plug and Socket are in correct type(Fig.1).
4. Reconnect winch's power.
5. Release the winch clutch handle and pull out aobut 3 meters steel cable
(or wire rope) laying loosly on the ground. Stay clear of the steel cable (or
wire rope) and hook.
6. Reengage the winch clutch handle.
7. Activate the Remote by pressing
(or wire rope) laying loosly on the ground. Stay clear of the steel cable (or
wire rope) and hook.
6. Reengage the winch clutch handle.
7. Activate the Remote by pressing
the "OUT" button for 4 seconds, the controller
red LED light up and stay on. simutaneously, the steel cable(or wire
rope) is feeding out.
8. Press the "IN" button
8. Press the "IN" button
for 4 seconds on the Remote Controller.the steel cable
(or wire rope)
retracting.
Fig.1
User Manual
Receiver: wireless remote control reveiver
Opeartion Voltage:DC 12V
Transmitter: wireless remote control(model name:FEWL2-1)
Opeartion Voltage:DC 12V from alkaline battery(23A)
Operation Frequency:315MHz
Buttons: "IN" and "OUT"