Shen Zhen DIVI Electronics.Co. LTD. BT2405 Manuale Utente

① . Power Button (Mode Button)
② . TF card 
③ . AUX port 
④ . Previous track/Volume+control 
⑤ . Pause 
⑥ . Next track/Volume-control

1 . When you use Wireless Connection function,open your 
    mobile phone ”Wireless Connection” and Find the 
    name“BT2405”to connect.
2. When you want to change to AUX, please turn off 

 your mobile phone Wireless Connection, use 3.5mm

 cable to connect your mobile phone and speaker.

Thank you for purchasing and using the Ainope product.
To make sure that this product has the good operation 
results for your phone or electronics, read the descriptions 
of this product and also refer to the descriptions of  
your mobile phone or electronics.

Receive distance : up to 10M
Input : DC5V-300mA
Power : 4W
Audio adapter : 3. 5mm
Time of play music : Up to 5 hours
Impedance : 4 OHM (Ω)
Music Mode : Wireless Connection, AUX
Lithium battery : 3. 7V/300mAh
Stand by time : Up to 200 Hours
product size : 79*38mm
Product: 118g

1. BT2405  uses  wireless  connection  technology  to

connect with other wireless connection devices such 

 as smart phones tablet PC, laptop to play.

2. BT2405 supports AUX in, it applies to every electronics

which with a 3. 5mm audio cable(such as iPhone, iPad, 
tablet PC, PSP, electronic dictionary, electronic reading
machine) to play.

3. BT2405 supports Hands free for calling.
4. BT2405 Built-in Lithium battery. It can music playback

 up to 5 hours

1 . Previous Track: Short press.Volume+control:long press
2. Next track:Short press,Volume-control:long press

1) After turn on BT2405 button and its Wireless Connection 

will enter pairing mode,blue Light flashes mean Wireless 

 Connection waiting for your connect.

2) Open your device’s Wireless Connection.Search for the 

 Wireless Connection speaker code BT2405 And click 

 it to pair.

3) After the blue light is stop to flash mean pairing was 

successful.

2) BT2405 will switch to AUX in mode automatically.
3) Insert  the  other  Plug  end  into the output audio

 interface of electronic device. Such as mobile phone.

 Computer.MP3.Etc.and then turn on the music 
 Player to enjoy music.

1) Insert a 3.5MM stereo plug into BT2405 after power 

BT2405

1) TF Card Mode Operation
2) Plug your music-loaded TF card into BT2405 after 

 power BT2405

1) When BT2405 battery is low, voice of “di” will inform 

 you to charge.BT2405 Will shut down automatically 

later if not charging.

2) The red light is permanently on while charging and

 turns off while charging fully.

1) Wireless Connection Speaker BT2405*1PCS
2) 3.5mm audio cable*1PCS, USB charging cable*1PCS,

Hook*1PCS

3) User manual*1PCS

This device complies with part 15 of the FCC rules. 
Operation is subject to the following two conditions: 
1) this device may not cause harmful interference, and 
2) this device must accept any interference received,
including interference that may cause undesired 
operation.  
Changes or modifications not expressly approved by 
the party responsible for compliance could void the 
user's authority to operate the equipment. 
NOTE: This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 

which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
 
1)  Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and 

receiver.
3) Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.
4)  Consult the dealer or an experienced radio/TV 
technician for help.

The device has been evaluated to meet general 
RF exposure requirement. The device can be used 
in portable exposure condition without restriction. 

Shenzhen Diyiwei Electronic Co., Ltd
Web: www.globalainope.com
Email:  support@globalainope.com 
Add: Longquan Science and Technology Park, No. 19, 
Huaxing Road,New Longhua District,Shenzhen, China
Made in China