Horseware Ireland CX3 Manuale Utente
IceVibe-CX User Menu
Manufacturer: Sentrix technology Ltd.
RF frequency: 2.4 GHz
Working temperature: 0-40℃
USB chargeable (2-4hrs), please don’t charging it overnight or over 12 hours, if any abnormal with
Manufacturer: Sentrix technology Ltd.
RF frequency: 2.4 GHz
Working temperature: 0-40℃
USB chargeable (2-4hrs), please don’t charging it overnight or over 12 hours, if any abnormal with
the battery, stop using it.
Please keep the unit away from heat source above 50℃, for long term storage, please keep it in a
Please keep the unit away from heat source above 50℃, for long term storage, please keep it in a
dry place and temperature around 10-30℃
Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as
Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as
disconnect device of adapter.
Operations:
Long press the Panels for 2 secs to activate them, to allow remote control by Transmitter.
Long press the panels for 2 secs again to switch it OFF.
Short press the panels will display battery level, Green= high, Yellow= middle, Red=low.
Long press the Transmitter for 2 secs, the Tx will blinking with green light when start up.
Long press the transmitter for 2 secs anytime to stop the panels, or the panels will auto off after
Operations:
Long press the Panels for 2 secs to activate them, to allow remote control by Transmitter.
Long press the panels for 2 secs again to switch it OFF.
Short press the panels will display battery level, Green= high, Yellow= middle, Red=low.
Long press the Transmitter for 2 secs, the Tx will blinking with green light when start up.
Long press the transmitter for 2 secs anytime to stop the panels, or the panels will auto off after
20mins.
FCC certificate:
This equipment has been tested and found to comply with the limits for a Class B digital device,
FCC certificate:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device has been evaluated to meet general RF exposure requirement. The device can be
This device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.