Authentrend TECHNOLOGY INC. ATKEYCARD1 Manuale Utente
3
o Before Start (Enroll Fingerprint, Battery and LED)
Enroll through Windows app
Enroll through Mac app
Enroll through Mobile app (we will provide it later)
Enroll through Mac app
Enroll through Mobile app (we will provide it later)
Battery
There is a 90mAh Li-on re-chargeable battery (through USB port)
Please do battery charge at your 1
Please do battery charge at your 1
st
time usage
o Insert card into USB port (PC or USB adapter) to start battery charging
o It will turn
o It will turn
LED#1 ON (Blue)
– power on the card
If you can’t see the LED#1 is ON, please wait for a while because
the Li-On battery protected by PCM, if the battery is low and
never charge for a long time, it needs resume time to start the
battery charging – so, please wait for minutes, LED will tune on
to start battery charging
never charge for a long time, it needs resume time to start the
battery charging – so, please wait for minutes, LED will tune on
to start battery charging
o During the charging, LED#2 shows
RED flashing
; if the LED#2 RED is off,
it means full charged.
If the card inserts to PC USB port – it’s USB mode, BLE is off
If the card inserts to USB power adapter – it’s battery charging
If the card inserts to USB power adapter – it’s battery charging
mode, BLE is still ON
If you find the LED#2 shows
slow RED flashing
, it means the card is in battery-
low state, please do battery charge immediately.
LEDs
STATE
LED#1 (
Blue
)
LED#2 (tri-color,
R
G
B
)
Power ON/OFF
Blue flashing,
then ON
then ON
Waiting for
fingerprint
(touch)
fingerprint
(touch)
Blue flashing
“Any Touch fingerprint” to
confirm the pairing from host
(White ON)
(White ON)
Fingerprint matching success
(
Green ON a second
) or Fail (
RED
ON a second
)
NFC ON (
Green ON for 15 sec
)
Bluetooth/BLE
LED#2:
Bluetooth broadcasting
(blue flashing)
LED#2:
BLE Connected (Blue ON)
Battery
Low battery (
slow RED flashing
)
Battery charging (
RED flashing
)
Fingerprint sensor