Axis Camera Starter Kit 0106-022-01 Dépliant
Codici prodotto
0106-022-01
Features
•
Built-in Webserver and web interface.
No need for a PC.
No need for a PC.
•
Quick and easy installation – simply connect to
your network and assign an IP address. A null
modem cable is supplied for set up without a
network.
your network and assign an IP address. A null
modem cable is supplied for set up without a
network.
•
Flash memory for easy firmware upgrades and
HTML file storage.
HTML file storage.
•
Built on the Linux operating system for
maximum reliability.
maximum reliability.
•
100 MIPS RISC processor for high performance.
•
ARTPEC-I based, high speed image compression.
10 frames/second, typically requires 1 Mbps
(maximum bandwidth limit can be set to
prevent network saturation).
10 frames/second, typically requires 1 Mbps
(maximum bandwidth limit can be set to
prevent network saturation).
•
Secure – password protected, or open to the
entire Internet community.
entire Internet community.
•
Compatible with operating systems such as
Windows 95, Windows 98, Windows 2000,
Windows NT, Windows ME, Linux and Mac OS.
Windows 95, Windows 98, Windows 2000,
Windows NT, Windows ME, Linux and Mac OS.
•
Works great with high-speed Internet access
such as DSL or cable modem as well as a
standard modem.
such as DSL or cable modem as well as a
standard modem.
Camera Specification
•
Digital, 24-bit color.
•
Image Pickup Device: 1/4" inch HAD RGB
progressive scan CCD.
progressive scan CCD.
•
HxV: 659x494. Backlight Compensation.
Automatic AGC.
Automatic AGC.
•
White Balance: Automatic, Fixed Indoor, Fixed
Fluorescent, Fixed Outdoor, Hold. Electronic
shutter: 1/30s - 1/30000s, light condition
adaptive frame rate control.
Fluorescent, Fixed Outdoor, Hold. Electronic
shutter: 1/30s - 1/30000s, light condition
adaptive frame rate control.
•
Maximum Illumination: 10,000 Lux.
•
Minimum Illumination: 3 Lux with light
condition adaptive frame rate enabled..
condition adaptive frame rate enabled..
Accessories
•
Camera mini-tripod, using standard 1/4" nut.
•
Null modem cable for modem installation. Power
cord extension cable.
cord extension cable.
•
Power supply: 12V AC, 9.6 VA.
•
I/O connector.
Image
•
JPEG and Motion-JPEG, 5 levels of compression
available.
available.
•
Resolution: 640x480 or 320x240 pixels.
•
Image frame rate: up to 10 frames/second.
Metrics
•
Weight: 0.5 lb. (0.24 kg), excluding power supply
and mini-tripod.
and mini-tripod.
•
Dimensions:
Height: 1.6 in (4.1 cm),
Width: 4.0 in (10.2 cm),
Length: 5.8 in (14.7 cm).
Height: 1.6 in (4.1 cm),
Width: 4.0 in (10.2 cm),
Length: 5.8 in (14.7 cm).
High or Low Compression
•
The table below contains average file size in
Kbytes, derived from real life tests.
Kbytes, derived from real life tests.
Hardware
•
8 MB RAM.
•
2 MB FLASH PROM.
•
ARTPEC-1 compression chip.
•
ETRAX 100, 32 bit RISC, 100 MIPS CPU.
Front Panel
•
Replaceable standard CS mount lens.
•
1/4 inch Sony progressive scan RGB CCD sensor
(640x480 pixels) for ultimate picture quality.
(640x480 pixels) for ultimate picture quality.
•
Shortest exposure time: 1/30000 s, longest
exposure time: 0.5 s.
exposure time: 0.5 s.
•
Focus 0.5 mm to infinity.
•
4.0 mm lens, equivalent to 35 mm on
a standard camera with aperture F 2.0.
a standard camera with aperture F 2.0.
•
High sensitivity – works down to 3 lux
(equivalent to candle light).
(equivalent to candle light).
•
Hidden push-key for focus and factory defaults.
Rear Panel
•
External power supply 12V AC (included).
Consumption max 7W.
Consumption max 7W.
•
Modem connection RS-232 modem connector
for dial-up use. Supports 3Com/US Robotics and
compatible modems. Accepts both dial-in and is
also able to dial-out, automatically delivering
images over e-mail or ftp.
for dial-up use. Supports 3Com/US Robotics and
compatible modems. Accepts both dial-in and is
also able to dial-out, automatically delivering
images over e-mail or ftp.
•
Input/Output connector for triggering the
camera on external events, e.g. a door sensor
with a solenoid.
camera on external events, e.g. a door sensor
with a solenoid.
•
10 or 100 Mbps Ethernet network connection.
Operating Environment
•
40–105° F (5–40° C).
•
20–80 % RHG, non-condensing.
•
Indoor only.
System Requirements
•
Can be used with most operating systems; including:
Windows 95/98, 2000/NT, Linux, Unix and Mac.
Windows 95/98, 2000/NT, Linux, Unix and Mac.
•
The only software needed is Internet Explorer 4.x
or Netscape Navigator 4.x. PC with Dial-up net-
working required for non-network installation
(null modem cable included). External modem
required for dial-up functionality. Please visit
our website for a full list of supported modems:
www.axis.com.
or Netscape Navigator 4.x. PC with Dial-up net-
working required for non-network installation
(null modem cable included). External modem
required for dial-up functionality. Please visit
our website for a full list of supported modems:
www.axis.com.
Network
•
RJ45 twisted pair cable, 10baseT Ethernet or
100baseTX Fast Ethernet, controllable maximum
bandwidth utilization.
100baseTX Fast Ethernet, controllable maximum
bandwidth utilization.
Modem Connection
•
Dial in and dial out. Pre-configured for easy
installation with: the major ISP’s. For an updated
list please visit www.axis.com.
installation with: the major ISP’s. For an updated
list please visit www.axis.com.
Supported Protocols
•
RJ45 twisted pair cable, 10baseT Ethernet and
100baseTX Fast Ethernet. TCP/IP, HTTP, FTP, SMTP,
ARP, BOOTP, PPP, CHAP, PAP.
100baseTX Fast Ethernet. TCP/IP, HTTP, FTP, SMTP,
ARP, BOOTP, PPP, CHAP, PAP.
Product Warranty
•
A one-year warranty is included.
www.axis.com
For more information visit our website:
©2001 Axis Communications AB. The Axis Communications logotype is a registered trademark of AXIS AB.
All other company names and products are trademarks or registered trademarks of their respective companies.
We reserve the right to introduce modifications without notice.
All other company names and products are trademarks or registered trademarks of their respective companies.
We reserve the right to introduce modifications without notice.
Technical Specification
s: AXIS 2100 Network Camera
Technical Specification
s: AXIS Camera Explorer
System Requirements
•
ACE uses the standard Internet TCP/IP suite of
protocols and can be used on:
protocols and can be used on:
•
Windows 95 with Winsock2
•
Windows 98/ME
•
Windows NT/2000 platforms
•
Internet Explorer 4.0, or later
Workstation Requirements
•
Minimum : 300MHz Pentium III, with at
least 128MB free RAM.
least 128MB free RAM.
Video Resolution
•
Variable drag-and-drop window sizes, available
for the following image resolutions: 320 x 240,
640 x 480 pixels
for the following image resolutions: 320 x 240,
640 x 480 pixels
Viewing Clients
•
An unlimited number of camera objects can be
defined and viewed within a single Explorer session.
defined and viewed within a single Explorer session.
•
Limited to four simultaneous sessions.
Resolution
640 x 480
320 x 240
Compression level
Lowest
250 kb
70 kb
Low
20 kb
8 kb
Medium
13kb
5 kb
High
8 kb
3 kb