CHENGDU LIREN ELECTRIC LTD 830208 Manuale Utente
RECORD IN USE DATE AND THE EXPIRATION DATA ON SENSOR PAD
THE EXPIRATION DATA OF SENSOR PAD = PAD USABLE LIFE + IN USE DATE
THE EXPIRATION DATA OF PAD TRANSMITER = 24 MONTHS + IN USE DATE
4.
Setting delay time
There are optional alarm delay of 0, 2, 4 seconds on SPT (bed/chair Sensor Pad
Transmitter only) to reduce false alarms. When used with a bed or chair sensor you
may choose to have the alarm sound immediately when pressure is removed from
the sensor or choose a 2 or 4 second delay to accommodate for any slight
movement.
-
Enter Setting delay time mode
a. Press and hold the Button (more than 2 seconds) on the SPT until you see 0s light is
blinking. SPT is in setting delay time mode now.
Time delay light (0s, 2s, 4s)
b. Press and release the Button on the front of SPT, next Time delay light will be
blinking. You can continue to press and release the Button until desired light is
blinking.
-
Exit Setting Notification mode
a.
Once you’ve landed on your desired Time delay light, stop operation.
b. The SPT automatically exits setting delay time mode after 10 seconds of inactivity.
This means the current Time delay is recorded to the SPT.
5.
Test Sensor Pad Transmitter
a. It is important to test the bed alarm before using with a patient. To test, Apply
pressure to bed/chair Sensor Pad, and released pressure from pad. The wireless
alarm will be transmitting to receiving devices.
b. If the programed receiving devices will get alarm, the Alarm light on SPT will flash to