Bogen HFCS1 Dépliant
SPECIFICATIONS
HFCS1
HFCS1LP
Frequency Response (-10 dB)*
65 Hz to 19 kHz
78 Hz to 19 kHz
LF Driver
6-
1
/
2
" (165mm) Polypropylene Cone
HF Driver
3/4" (20mm) Polycarbonate Dome
Sensitivity (1W/1M)
89 dBspl (Average 100 Hz - 10 kHz)
Impedance Ratings
Low (16 ohms) / High (70V/100V)
Power Input (Max.)
75W @ 16 ohms; 32W @ 70V/100V
Power Settings (in watts)†
70V: 32, 16, 8, 4, 2, 1 / 100V: 32, 16, 8, 4, 2
Baffle Material
Fire-rated (94VO) ABS
Back Can Material
Heavy-Gauge Plated Steel
Terminations
4 Terminal Plug-in Input Connector
Product Weight
9 lb.
7-
3
/
4
lb.
Speaker Dimensions
1
2-
5
/
1
6
" dia. x 12" D
1
2-
5
/
1
6
" dia. x 7-
3
/
4
" D
Minimum Vertical Clearance Requirement
11
"
6-
3
/
4
"
Included Accessories
Input Terminal Cover (2 Halves); (4) Screws; (1) Plug-in Input Connector
Optional Accessories
Tile Bridge Support Ring (TBCR); Cable Kit (CK10)
Baffle Ring & Grille Color
Off-white
• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deeper bass response (HFCS1)
• Low-profile housing allows greater range of installations
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deeper bass response (HFCS1)
• Low-profile housing allows greater range of installations
(HFCS1LP)
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts) - 32, 16, 8, 4, 2, and 1
• 16-ohm input for non-transformer, multi-speaker
• Selectable power taps via front-mounted control
• Power taps (in watts) - 32, 16, 8, 4, 2, and 1
• 16-ohm input for non-transformer, multi-speaker
systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and
polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Connector provides loop-through terminals for the
next speaker
• Integral swing-out clamps for easy installation
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet
provides protection for connections
• Off-white textured finish easily painted to match theme
decor
• Attractive, contemporary, sturdy steel grille assembly
with fine perforations
• Accessory tile bridge support ring (Model TBCR, sold
separately)
• Accessory 10-foot long cable kit (Model CK10, sold
separately)
Features
Description
Specifications subject to change without notice.
© 2006 Bogen Communications, Inc.
Part No. 54-8016-03B 0611
© 2006 Bogen Communications, Inc.
Part No. 54-8016-03B 0611
High-Fidelity
Ceiling Speakers
Models HFCS1
and HFCS1LP
The Bogen HFCS1 and HFCS1LP ceiling loudspeakers deliver superior sound and clear intelligibility in a variety of ceiling
environments.
The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.
Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille).
The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and excep-
tional low-frequency response for both music and speech reinforcement.
environments.
The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.
Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille).
The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and excep-
tional low-frequency response for both music and speech reinforcement.
Technical
Specifications
*
Half-Space Response
† Front panel, switch-selected
HFCS1
HFCS1LP