Shenzhen Infinite lntelligence Technology Co. Ltd ZCWX-013 Manuale Utente
无线充电器使用说明书
适用设备
SAMSUANG:S6/S6edge,S6edge+S7/S8edge/S9,Note5,Note8
LG:G3,G5/G5+,G6/G6+
IPHONE:iphoneX,iphone8,iphone8plus
Nokia:Lumia830,Lumia920,Lumia1020,Lumia1520,Lumia930
Google:Nexus4,Nexus5,Nexus6
1.
2.把符合QI标准的无线充电器数码设备放置在无线充电器上，即
可充电，指示灯同时亮起。
可充电，指示灯同时亮起。
包装内容：无线充电器*1，USB电源线*1，说明书*1
产品规格：
尺寸：78*78*4.8mm
输入：5V /2A，9V /1.8A
输出：5V / 1A，9V/1.8A
输出：5V / 1A，9V/1.8A
重量：60克
...等其它qi标准手机
充电区域
指示灯
M i croUSB电源输 入口
一般充电:慢闪
快速充电:恒 亮
异物检 测:快闪
快速充电:恒 亮
异物检 测:快闪
将电源线插入符合本产品之适配器后，
与无线充电器连接，此时指示灯会亮一下，
表示通电完成
与无线充电器连接，此时指示灯会亮一下，
表示通电完成
输入：
5V /2A，9V /1.8A
5V /2A，9V /1.8A
&
本产品可能因阳光高温曝晒
而启 动 安 全 保护机制,无 法
立即 为 手 机 充电,稍 于温 度
降低 后,即 可 恢复正常使 用
而启 动 安 全 保护机制,无 法
立即 为 手 机 充电,稍 于温 度
降低 后,即 可 恢复正常使 用
快充模式须使用QC2.0适配器
保护套厚度2mm以下为最佳充电效率,
超 过8mm可能导致充电速度慢或无法充电
不 可 使 用 金属保护套
超 过8mm可能导致充电速度慢或无法充电
不 可 使 用 金属保护套
将 手机 放 置正 中
间 充电 效 率最 佳
位置放偏将导致充电效率低,
甚至无 法充 电
甚至无 法充 电
吸盘
Applicable equipment:
SAMSUANG:S6/S6edge,S6edge+S7/S8edge/S9,Note5,Note8
LG:G3,G5/G5+,G6/G6+
IPHONE:iphoneX,iphone8,iphone8plus
Nokia:Lumia830,Lumia920,Lumia1020,Lumia1520,Lumia930
Google:Nexus4,Nexus5,Nexus6
1.
2.Place your Qi-enabled device on the charging pad
Package Contents：Wireless charger*1，
Product specifications：
Size：78*78*4.8mm
Input：5V /2A，9V /1.8A
Output：5V / 1A，9V/1.8A
Output：5V / 1A，9V/1.8A
Weight：60g
Charging area
LED
Power input
Plug in the cable to the appropriate adapter, then
connect it with wireless charger, led indicator will
flash once at that time, and standby mode on.
(Note Please: Use the most appropriate adapters
for best results.)
connect it with wireless charger, led indicator will
flash once at that time, and standby mode on.
(Note Please: Use the most appropriate adapters
for best results.)
Input:
5V /2A，9V /1.8A
Please site your smart
phone at the center of
the pad correctly for
high-speed charging.
phone at the center of
the pad correctly for
high-speed charging.
Inappropriate place may I
nfluence the charging
speed or even result in
charging disconnect.
nfluence the charging
speed or even result in
charging disconnect.
USB cable*1，Manual *1
Normal charge: slow flash
Fast charge: long bright
FOD: fast flash
Different application
Attention:
For charging efficiency, the thickness of
phone's case is suggested less than 2mm,
and over 5mm may lead to slow charging or
failure of charging
Do not use metal case.
Please keep the environment temperature in 0-45℃
phone's case is suggested less than 2mm,
and over 5mm may lead to slow charging or
failure of charging
Do not use metal case.
Please keep the environment temperature in 0-45℃
The fast charge mode requires QC 2.0 adapter
Please keep the charger and receiver away from water and other liquid.
If cleaning the charger, please make sure the power is disconnected.
to charge, led indicator light on.
FCC Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful I
nterference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio
TV technician for help
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful I
nterference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio
TV technician for help
Instruction manual
Suction cup