Xiamen Caimore Communication Technology Co. Ltd. CM520-8AF Manuale Utente
Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------------------
Tel:+86 592 5901215 web:www.caimore.com/emain.asp
17
17
1
DCD
carrier wave
signal check
signal check
Output
2
RXD
receive data
Output
3
TXD
send data
Input
4
DTR
data
terminal ready
Input
5
GND
Power reference
ground
6
DSR
data
device ready
Output
7
RTS
Request to send
Input
8
CTS
Data device get
ready to receive
data
Output
Chapter 3 Rapid Configuration
We release this setting instruction in order to realize below mentioned two points.
First, When customer receives our device, they can check fast whether the device is
good or not, whether it can work normally or not. Second, Most customer can use
device fast by only changing setting parameters of this setting instruction (
good or not, whether it can work normally or not. Second, Most customer can use
device fast by only changing setting parameters of this setting instruction (
other
parameters are default setting
). Take Window XP as an example, let us explain our
wireless industrial fast setting process.
Fast setting usually need to configure WAN parameter and LAN parameter and
keep other parameters as leaving-factory default setting. If need to change other
parameters, please read <
parameters, please read <
chapter 4 Detailed Parameters Configuration
>
3.1、Inset SIM card into gateway SIM card socket(
refer 2.3
).
3.2、Connect antenna(
refer 2.4
)
3.2、Connect gateway with PC hardware
Method1:Gateway connect with Switch(OR HUB) by Ethernet cable. PC
connected with LAN 1,
please kindly check whether Ethernet yellow indicator is on
or not,if not,please check the link and interface if connect tightly or not.