Xiamen Caimore Communication Technology Co. Ltd. CM520-8AF Manuale Utente

   

   

------------------------------------------------------------------------------------------ 

Tel:+86 592 5901215                                                                  web:www.caimore.com/emain.asp 

 

27 

27 

Wireless Gateway Ethernet port configuration (

local IP address and DHCP server

) 

 

Picture 4-1-4 

  Local interface 1 (LAN0): multiplex with WAN, it can be used to connect 

with LAN if without using PPPOE. 

Local IP: It is gateway LAN0 interface IP address, default setting IP address is 

192.168.8.1.

 

Local Subnet Mask: Set Subnet Mask corresponding local IP address. 

MAC Address: Set gateway ETH MAC address. 

): used to connect with WIFI and 4-port LAN. 

Local IP: It is gateway WIFI and LAN1-4 interface IP address, default setting 

IP address is 

192.168.8.1. 

Local Subnet Mask: Set Subnet Mask corresponding local IP address. Default 

setting Subnet Mask is

 255.255.255.0

 

MAC Address: Set gateway LAN1-4 MAC address. 

Primary  DNS/Second  DNS:  It  is  the  domain  name  decoding  server  address, 

and  default  situation  (blank)  is  obtained  from  ISP  when  gateway  dial-up.  If 

customer has stable DNS server, can input customer stable DNS server address, 

but we suggest that it is better to obtain from ISP when gateway dial-up. 

Notice: 

1. Make sure all IP connected to equipment are in the same Subnet Mask with 

gateway. 

2. When multi units work in the same LAN, MAC address will restore to default 

setting after “load default setting”. It is easy to make MAC address conflict with 

other equipment. So please revise MAC address. 

3. If users input DNS server address, after dialing, please check whether DNS