Xiamen Caimore Communication Technology Co. Ltd. CM520-8AF Manuale Utente
Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------------------
Tel:+86 592 5901215 web:www.caimore.com/emain.asp
58
58
No: Not initiative to report the GPS data to a central address.
Device ID: The user-defined gateway’s mark.
Custom registration package: the user-defined registration package .
The uploaded GPS data options: Open the initiative to report, choose GPS data
content uploaded to the central address.
GGA, GLL, GSA, GSV, RMC, VTG, ZDA the data contents, see Appendix 7.
Note: Not the initiative to report then,to receive AT command description.
Get Coordinates: AT + LOCATE: Re: Lon = 118.176565; Lat = 24.493771; (Lon =
Longitude (ddmm.mmmm); Lat = Latitude (ddmm.mmmm)).
Get Time: AT + TIME: Re: Time = 125959; (12 H 59 M 59 S; Note: GPS reception
time is world time, users need to convert it into local time according to their own time
zone, such as China in the East eight zone, world time +8 hours).
Get Data Status: AT + STATUS: Re: Status = A; (A positioning data valid, V position
data is invalid).
Get relative speed: AT + SPEED: Re: Speed = 1.13; (rate is 1.13 nm / hr).
Get altitude : AT + ALTITUDE: Re: Altitude = 58.2; (Altitude is 58.2m).
Device ID: The user-defined gateway’s mark.
Custom registration package: the user-defined registration package .
The uploaded GPS data options: Open the initiative to report, choose GPS data
content uploaded to the central address.
GGA, GLL, GSA, GSV, RMC, VTG, ZDA the data contents, see Appendix 7.
Note: Not the initiative to report then,to receive AT command description.
Get Coordinates: AT + LOCATE: Re: Lon = 118.176565; Lat = 24.493771; (Lon =
Longitude (ddmm.mmmm); Lat = Latitude (ddmm.mmmm)).
Get Time: AT + TIME: Re: Time = 125959; (12 H 59 M 59 S; Note: GPS reception
time is world time, users need to convert it into local time according to their own time
zone, such as China in the East eight zone, world time +8 hours).
Get Data Status: AT + STATUS: Re: Status = A; (A positioning data valid, V position
data is invalid).
Get relative speed: AT + SPEED: Re: Speed = 1.13; (rate is 1.13 nm / hr).
Get altitude : AT + ALTITUDE: Re: Altitude = 58.2; (Altitude is 58.2m).
4.6 Other configurations
4.6.1 Activation Mode
Automatic modem
Device enters into auto dial-up status after power on. It is leaving-factory
default setting
Phone mode
Phone mode
Wake up by phone (the mobile number is SIM card number that is inserted
on gateway). Under this mode, gateway didn’t dial-up after power on, when there
is calling, gateway dial-up after checking the ringing
is calling, gateway dial-up after checking the ringing