Xiamen Caimore Communication Technology Co. Ltd. CM520-8AF Manuale Utente
Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------------------
Tel:+86 592 5901215 web:www.caimore.com/emain.asp
68
68
center server, the unit is second. When the connection with center server fails, if
reconnect time is less than configured times, it will reconnect center server
within the appointed time.
Interval of keeping alive:Interval time of keeping alive data sent periodically
to maintain link. Unit is second. Default is 60s. Interval of keeping alive time
can’t set too small, if so, it will cause flow increasing. It also can’t be too large,
if so, device can be detected after long time offline. Suggested value is
10S<X<120S
Self-registered packet: When DTU establish connection with center server,
DTU will send registration information to center; if registration packet needs
specific definition, please install the specific definition here
Keep alive packet define:After DTU connect with wireless network, if there is
no data transmission within a certain time, wireless network will disconnect
with DTU automatically. In order to keep DTU connection with wireless
network, it will send packet to data center from time to time
Option:None Function introduction: don’t send packet
Option:Use Default Function introduction: use default 0xFE
Option:Self Define Function introduction: Customer define their own packet
according to actual situation
4.6.7 SNMP Configuration
SNMP is Simple Network Management Protocol. If enable this function, the
device can connect with SNMP server, and users can manage and configure the
multi devices with SNMP client, including parameter configuration of one or
more device, upgrading remotely and querying GPS location information(if GPS
is supported), flow information, real-time signal information, etc.
multi devices with SNMP client, including parameter configuration of one or
more device, upgrading remotely and querying GPS location information(if GPS
is supported), flow information, real-time signal information, etc.