NSI International Inc. NSI2019-BOOM-1 Manuale Utente

Item # 69901

Specifications

Bluetooth Version

Product Size

3.96in x 2.8in x 1.02in
(100mm x 71mm x 26mm)

5.0
32.8ft (10m)
1W
5V
DC3.3V ~ 4.2V
>90DB
<1%
150-16KHZ
~ 120 min
1.18in (30mm)
3.7V / 300mAh

Bluetooth Distance
Power Output Rating
Charging Voltage
Operating Voltage
S/N
THD
Transmit Frequency
Music Playing Time
Speaker Parameter
Battery

Little Speaker

s...

Little Speaker

s...

BIG SOUND!

1. Speaker
2. Equalizer
3. Volume Control
4. Hook
5. Micro USB Port

6. Power/Pairing/Charging Indicator
7. Power/Sync Button
8. Kickstand (Handle bends backward)
9. Mini USB Charging Cable

Charging the Battery
1. When the speaker is low on battery, a voice prompt will indicate a low battery every 2 minutes until

it is plugged in to charge.
2. Insert the charging cable into the Micro USB port, then connect the USB plug into a 5V/300mAh

power source. A red LED light will turn on.
3. Once fully charged, the red LED light will turn off.

Bluetooth

Pairing

1. Turn ON by holding the button for 2 seconds. A voice prompt will indicate Boom Box is on and blue

LED light will flash when ready for pairing.
2. Activate your phone or other device’s Bluetooth function.
3. Locate and connect to the Bluetooth speaker, named “BOOMBOX”.
4. When the two devices are connected, a voice prompt will indicate a successful connection and blue

LED light will be solid.
5. If you are unable to play music, refresh the Bluetooth connection.
6. Adjust the volume by using the volume control dial on the front of the Boom Box.
7. When the two devices are disconnected, a voice prompt will indicate disconnection and blue

LED light will flash.
8. Turn OFF by holding the button for 4 seconds. A voice prompt will indicate Boom Box is off and blue

LED light will turn off.
9. The Boom Box will turn off automatically 5 minutes after disconnected from Bluetooth.