Electroninks Writeables Inc. EI185RX Manuale Utente
Why are no motors spinning?
- Check to see if the battery is charged and securely in place, the red light should flash.
- Make sure the hub clamps are connected to the silver ink of the arms.
- Check to see if the Wi-Fi is connected to the CSDrone network. When the app is open
the red light will be solid if connected.
- Retry arming the drone (refer to step 10).
- Make sure the hub clamps are connected to the silver ink of the arms.
- Check to see if the Wi-Fi is connected to the CSDrone network. When the app is open
the red light will be solid if connected.
- Retry arming the drone (refer to step 10).
Why is one of my motors is spinning slower/doesn’t spin with the others?
If you have access to a multimeter go ahead and check the resistance of the ink on your
arms. Ideally you want it to be below 2 ohms on each side.
- Make sure the motors are seated so they are touching the silver ink.
- Add another coat of ink once the first coat has completely dried.
- Make sure the hub and motor clamps squeeze the arm firmly.
- Try making new arms, over time they will wear wear down, bend and crimp.
- Replace the cardboard arms with the pre-made arms to test your motors.
- Bake the arms in an oven/toaster oven on the lowest setting for 10 - 15 minutes.
If you have access to a multimeter go ahead and check the resistance of the ink on your
arms. Ideally you want it to be below 2 ohms on each side.
- Make sure the motors are seated so they are touching the silver ink.
- Add another coat of ink once the first coat has completely dried.
- Make sure the hub and motor clamps squeeze the arm firmly.
- Try making new arms, over time they will wear wear down, bend and crimp.
- Replace the cardboard arms with the pre-made arms to test your motors.
- Bake the arms in an oven/toaster oven on the lowest setting for 10 - 15 minutes.
DO NOT PUT IN THE MICROWAVE!
FAQ