GTSYS Limited IRUPOE-07-V2 Manuale Utente
Quick Reference Guide
3.1 Test Setup
The first steps to start with:
•
•
Set the Test to run. (FCC,ETSI,India...)
•
Set the antenna type used (7.5dbi,12dbi)
The power level will be set automatically for the test region depending on the selected
antenna.
antenna.
3.2 Approval Carrier test
Depending on your selection FCC/ETSI or India you are able to select the dedicated
Frequencies:
Frequencies:
•
FCC: 902.75 Mhz 914.75 Mhz 927.25 Mhz
•
ETSI: 865.70 Mhz 866.30 Mhz 866.90 Mhz 867.50 Mhz
•
INDIA: 866.00 Mhz 866.50 Mhz 867.00 Mhz
with or without a modulated carrier.
To proceed with the carrier test:
•
Select the tab 'Carrier Test'
•
Use the Combox to select the frequency.
•
Select 'Modulation on' for a modulated carrier.
•
If needed adjust the powerlevel (see page 10 - 6.1To set the power level)
•
Click the 'Start' button to make the IR-x-POE running in the test mode.
The carrier indication Icon change from 'Carrier off' to 'Carrier on'
The carrier indication Icon change from 'Carrier off' to 'Carrier on'
•
Click the 'Stop' to stop the test, the carrier indication Icon change from 'Carrier on' to
'Carrier off'
'Carrier off'
GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: sales@gtsys.com.hk
Copyright © 2015 GTSYS – GTSYS reserves the right to change specifications without prior notice
Page 4 / 11