Alco Electronics Ltd ONB14AV204 Manuale Utente

PRODUCT GUIDE

 Model:  ONB14AV204

Clock Radio

with Bluetooth

®

 Technology 

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of 
sufficient magnitude to cause an electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in this owner’s guide.  

* SEE GRAPHIC SYMBOLS ON THE BOTTOM OF UNIT *
Rating plate was located at bottom  of enclosure of the apparatus.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including 
interference that may cause undesired operation.

 

Changes or modifications to this unit not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful  interference to radio or television reception, which can be determined by turning the equipment  off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit
     different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

•  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
•  The AC/DC adapter is used as disconnect device. The AC/DC adapter of apparatus should not be obstructed OR

should be easily accessed during intended used. To be completely disconnect the power input , the AC/DC adapter
of apparatus should be disconnected from the mains.

•  Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation.
•  Battery- shall not be exposed to excessive heat such as sunshine, fire or the like.
•  The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-

cloths, curtains etc.

•  No naked flame sources such as lighted candles should be placed on the apparatus.
•  The AC/DC adapter and apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on AC/DC adapter and apparatus.

Never use the unit where it would be subject to:
-  Heat sources such as radiators or air ducts.
-  Direct sunlight.
-  Excessive dust.
-  Moisture or rain.
-  Mechanical vibration or shock.
-  Uneven surface.

This symbol indicates that this product 
incorporates double insulation between the 
hazardous mains voltage and user accessible parts.

1. 

Read these instructions.

2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding 
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not 
fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.
12.  Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, 

or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightening storms or when unused for a long period of time.
14.  Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped.

Portable Cart Warning

1. 

   HOUR/TUNING Button

2.  1 (Alarm 1) Button
3. 

 (Clock)  /FUNCTION  Button 

(FM/AM/Bluetooth

®

mode)

4. 

(Standby/On) Button

5.  - VOLUME + Button

2

3

4

8

5

9

6

7

1

10

6.  PRESET/SNOOZE Button
7. 

(Play/Pause)/MEMORY/PAIR Button

8. 

 (Sleep) Button

9.   2 (Alarm 2) Button
10. 

   MIN/TUNING Button

11

12

13

14

15

16

17

18

19

20

11.  PM Indicator
12.  BUZZ (Alarm 1/beep alarm indicator)
13.    RADIO alarm for alarm 1 Indicator)
14.  ALM1 (Alarm 1 indicator)
15.  Display(Hour Digits:Minute Digits)
16.  ALM2 (Alarm 2 indicator)

17.  RADIO alarm for alarm 2 Indicator
18.  BUZZ (Alarm 2/beep alarm indicator)
19.   BT (Bluetooth® pairing for Indicator)
20.  Speakers 
21.   USB Charger only (Max.5V      2.1A)
22.  AC Power adaptor

22

21

•  Do not place any heavy objects on top of the unit.

•  When the unit is used with an AC power adapter, do not wrap the unit in a cloth, blanket, etc.. If you do so, the

temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the unit.

•  If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, the moisture

may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case, remove the 

disc and leave the unit in a warm place for several hours until the moisture evaporates.

•  For the unit to operate at its best, it should not be subject to temperatures below 41°F (5°C) or above 95°F

(35°C).

Before use, make sure that the rated voltage of your unit matches your local voltage.

1.  Open the battery compartment door on the bottom of the unit and insert 

2 AA-batteries (not included) into the battery compartment.
Note: Make sure that the positive (+) and negative (-) terminals on the
battery align with the + and - symbols in the battery compartment.

2.  Close the battery compartment door.

We  strongly  recommend  you  install  2  AA-batteries  for  the  power  backup
function. If the AC power supply is interrupted, the battery supplies power to 
keep the clock operating and the alarm time in memory.

To Wall Outlet

AC Adapter

•  During a power outage, the time is maintained but the display turns off to

conserve battery power until electrical power is restored. The alarm will also 
not function, but the alarm time will be saved in memory. No other features of the clock radio will operate when 
using backup battery power, this includes the radio which only functions with electrical AC power. 

•  This battery is only for clock operation and alarm memory during power interruption. You cannot listen to the radio

with the battery. 

To check the battery condition, unplug the AC adapter from the wall outlet and plug it in again after a few minutes. If 

the displayed time is incorrect, replace the battery with a new one.

Caution: 

To prevent electrical shock do not insert a Polarized plug into any outlet unless all blades can be fully inserted  

and are unexposed after insertion.

EN-1 

EN-2

EN-3