Aga Rangemaster AGA-TC3 Manuale Utente
GENERAL NOTES
3
NOTE: THESE INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE
AND THE USER TO RETAIN FOR FUTURE REFERENCE.
AND THE USER TO RETAIN FOR FUTURE REFERENCE.
Before installation of an AGA can be made, the site is inspected for suitability by an authorized
AGA distributor and corrected where necessary to conform with local installation codes or in the
absence of local codes with:
AGA distributor and corrected where necessary to conform with local installation codes or in the
absence of local codes with:
NATIONAL ELECTRICAL CODES ANSI/NFPA 70.
DELIVERY REQUIREMENTS
There must be access to the kitchen to manipulate a foot print of 39
9
/
16
” (1005mm) x 29
1
/
8
”
(740mm). A wooden template (skate with castor wheels) of dimensions 39
9
/
16
” (1005mm) x
29
1
/
8
” (740mm) could be used to check if the AGA Total Control (TC3) part built appliance is
able to fit through the property grounds and doors into its installation position in the kitchen. It
must also be considered that the height of the appliance is 35
must also be considered that the height of the appliance is 35
13
/
16
” (910mm), so high level
obstacles/restrictions must not be overlooked.
If this skate/template
can be manipulated through the property grounds and doors
into position, then the AGA Total Control (TC3) can be installed as intended with no
re-work.
re-work.
If the skate/template
cannot be manipulated through the property grounds and
doors, into position then the following must be considered.
Use of specialised delivery company who can remove property doors/windows etc to
gain greater access or use specialised equipment, such as a stair lifter.
gain greater access or use specialised equipment, such as a stair lifter.
GENERAL INSTALLATION REQUIREMENTS
The installation of the range must be in accordance with the relevant requirements of the local
Wiring and Building Regulations. It should be in accordance also with any relevant requirements
of the Local Authority.
Wiring and Building Regulations. It should be in accordance also with any relevant requirements
of the Local Authority.
In your own interest and that of safety to comply with the law, all appliances should be installed
by an authorized AGA distributor in accordance with the relevant regulations.
by an authorized AGA distributor in accordance with the relevant regulations.
USA
Model Number
FCC ID: A2M-AGA-TC3
FCC ID: A2M-AGA-TC3CKR
This device complies with part 15 of the
FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CANADA
Model Number
IC 10181A-AGATC3
IC 10181A-AGATC3CKR
Model No. AGA TC3