APart PA8250 Dépliant
APart PA8250
MULTI CHANNEL AMPLIFIER
This versatile 19” - 8 channel amplifier is compact but yet powerful and provides 8 x 250 W of
program power in 4 Ohm use. For higher power requirements, the amp can be bridged per 2
channels with 4 x500 W in 8 Ohm bridged mode as a result.
program power in 4 Ohm use. For higher power requirements, the amp can be bridged per 2
channels with 4 x500 W in 8 Ohm bridged mode as a result.
It has very good cooling thanks to 2 high efficiency fans with 3-step control that kick in once
the temperature exceeds 50°C.
the temperature exceeds 50°C.
Thanks to its input signal linking it is possible to get one single signal through all the output
channels. The high pass filters takes care of unwanted rumble or low frequency sounds.
channels. The high pass filters takes care of unwanted rumble or low frequency sounds.
Inputs can be connected through RCA-cinch or Euroblock. The 8 speaker terminals are
Euroblock as well, so there is no need for soldering in those difficult on-site conditions.
Euroblock as well, so there is no need for soldering in those difficult on-site conditions.
The PA8250’s 8-channel architecture makes it easy to set up volumes for all 8 zones
individually. This power amp is especially suitable for multiroom- or matrix systems or places
like cafés, sportsbars or pubs : venues where you prefer different music levels in different
areas.
individually. This power amp is especially suitable for multiroom- or matrix systems or places
like cafés, sportsbars or pubs : venues where you prefer different music levels in different
areas.
A combination with the APart PT8210 transformer provides a maximum of flexibility to build a
custom designed system of 100 V and low-impedance zones. A solution which will allow any
custom designed system of 100 V and low-impedance zones. A solution which will allow any
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM