EnGenius Technologies ENSTA2 Manuale Utente

I

NSTALLATION

W

ALL

 M

OUNTING

 

THE

 D

EVICE

 

2-3

5. Plug the other end of the Ethernet cable into the PoE port 

of the PoE injector.

6. Turn over the EnStation2. Then insert the pole mounting 

strap through the middle hole of the EnStation2. Use a 
screwdriver to unlock the pole-mounting ring putting it 
through the EnStation2.

7. Mount the EnStation2 securely to the pole by locking the 

strap tightly.

This completes the installation procedure.

1. Plug the dynamic stick into the bracket firstly.

2. Combine the sealing nut and the assembled kit, as well 

as tighten it.

3. Put the mock washer on dynamic stick.

4. Assemble the mounting kit with the CPE.

5. Drill the hole to input the mounting screws.

6. Use the included screws to input the mounting screws.

7. Let the hole of the bracket to aim at the screws on the 

wall and hang the device to fix it.