Narco Avionics Inc AT165 Manuale Utente
March, 2004
5
+0100ft HLD-> 01000ft
XXXXXXXXXXXXXX
LIMIT +-0000ft
XXXXXXXXXXXXXX
PRESSURE ALT 08500ft
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
ALTITUDE DISPLAY
Displays the altitude data supplied to the AT165 from the blind altitude encoder.
ALTITUDE HOLD
HOLD MODE
Pressing HOLD will capture the Aircraft’s current altitude and use it as the
reference for the hold function. The altitude display will now show the
reference altitude and the deviation from that altitude in 100ft increments. If
reference for the hold function. The altitude display will now show the
reference altitude and the deviation from that altitude in 100ft increments. If
the deviation exceeds the BUFFER limit, the altitude display will flash.
BUFFER SETTING
BUFFER SETTING
Pressing HOLD for greater than 2 seconds will allow setting of the HOLD
BUFFER value. Use the Data Entry switch to set the desired HOLD BUFFER
value. The HOLD BUFFER can be set from 200ft to 2500ft in 100ft steps.
When finished, press HOLD to save the HOLD BUFFER value.