Motorola Solutions Inc. 99FT5012 Manuale Utente

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from 
your mouth.

When you are connected, the first line of the display shows 
the ID or alias of the target radio and the Private Call icon. 
The second line displays Private Call. Press and hold the 
PTT button to talk. Release the PTT button to listen.
OR
If no acknowledgment is received, the display shows No 
Answer.

You can also make a Private Call via Contacts (see Making a 
Private Call from Contacts on page 29) or perform a quick 
alphanumeric search for the required alias via a keypad entry 
(see Making a Private Call by Alias Search on page 30).

NOTE: This is a trunking only feature.

This feature allows you to send an individual Call Alert page if 
there is no answer from the target radio.

NOTE: Your radio must be programmed to allow you to use 

this feature.

Press the programmed Quick Access (One-Touch) Private 
Call button to dial the programmed ID (number) and proceed to 
Step 4.

Follow the procedure below.

Press the Call button to Call.

The display shows the call list, you can scroll through and 
select the required ID (any target ID or last transmitted or 
received ID) or go to the manual dial option to enter the 
required ID.

Press the PTT button to initiate the Private Call request.

The first line of the display shows Calling. The second line 
displays the target alias or ID and the Private Call icon.

When you are connected, the first line of the display shows 
the ID or alias of the target radio and Private Call icon. The 
second line displays Private Call. You may hear the 
Private Call voice if the target is talking.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from 
your mouth. Press and hold the PTT button to talk. Release 
the PTT button to listen.
OR
If no acknowledgment is received, the display shows No 
Answer.

NAG_LACR.book  Page 19  Monday, August 23, 2010  1:03 PM