Motorola Solutions Inc. 99FT5101 Manuale Utente
68
MN002253A01-AD
Chapter 11: SLR 8000 Maintenance and Disassembly/Reassembly
Chapter 11: SLR 8000 Maintenance and Disassembly/Reassembly
3 Pull the keypad out of the faceplate.
11.6.5
Removing the Fan Module
Prerequisites:
NOTICE: If replacing the fans only, it is not necessary to remove the base station/repeater from
the rack or remove either of the covers. However, please ensure that the power cord and all
external cables are disconnected per
the rack or remove either of the covers. However, please ensure that the power cord and all
external cables are disconnected per
and the front bezel is removed
Procedure:
1 Disengage the cable from the Power Amplifier fan and its connection.
2 Disengage the cable from the Power Supply fan and its connection.
3 Disengage the latch on the fan clip by putting a flathead screwdriver through the gaps in the fan
blades.
Figure 71: Disengaging Latch on Fan Clip
11.6.6
Removing the Bezel Clip
Procedure:
Remove the two screws from each of the two bezel clips with a T10 Torx driver.