Arris XI6 Manuale Utente
1
IMPORTANT SAFETY INSTRUCTIONS
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods
of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
•
The mains plug is the main disconnect device. It shall remain readily accessible
and operable.
•
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
•
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
•
WARNING: Batteries shall not be exposed to excessive heat such as sunshine,
fire or the like.
•
See label on bottom of unit for additional markings.
During Transportation to the Subscriber Home
•
Transport the cable terminal in its shipping box or an equally padded
container.
•
Do not expose the terminal to rain or moisture.
During Installation
•
Do not place the terminal in an enclosed area where the cooling vents are
blocked or impede the flow of air through the ventilation openings.
•
Install the terminal so that its position does not interfere with its proper
ventilation. For example, do not place the terminal on a bed, sofa, rug, or
similar surface that could block the ventilation openings.
similar surface that could block the ventilation openings.
•
Install the terminal so that there is a minimum of two inches of space between
surrounding surfaces and the top, left, and right sides of the terminal to ensure
proper ventilation.
proper ventilation.
•
Install the terminal away from heat sources such as radiators, heat registers
and stoves. Installation of the terminal near consumer electronics devices, such
as stereo receiver/amplifiers and televisions, is permitted as long as the air
surrounding the terminal does not exceed 40º C (104º F).
as stereo receiver/amplifiers and televisions, is permitted as long as the air
surrounding the terminal does not exceed 40º C (104º F).
•
Place the terminal on a flat surface not prone to vibration or impact.
•
Do not place the terminal on top of another electronic device.
•
Do not install the terminal in an area where condensation occurs.
•
To prevent the temporary loss of guide data and cause a temporarily non-
responding terminal, do not plug the AC power cord into a switched power
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
•
To avoid shock and vibration damage to the internal hard drive, do not move
the terminal while it is plugged in.
•
To allow the hard drive to spin down and park its heads, wait at least 10
seconds after disconnecting power before moving the terminal.
•
Install the terminal so that there is a minimum of 3 inches of space between
surrounding surfaces and the back of the terminal to ensure proper ventilation.
FCC Certification
This product contains a radio transmitter and accordingly has been certified as
compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
FCC Certification
This product contains a radio transmitter and accordingly has been certified as
compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC RF
exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles) must
be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC DECLARATION OF CONFORMITY
ARRIS International, PLC, 3871 Lakefield Drive, Suwanee, GA 30024,
1-866-36-ARRIS, declares that this Class B digital device complies with 47 CFR
Parts 2 and 15 of the FCC rules.
Note: This device is for indoor use only.
exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles) must
be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC DECLARATION OF CONFORMITY
ARRIS International, PLC, 3871 Lakefield Drive, Suwanee, GA 30024,
1-866-36-ARRIS, declares that this Class B digital device complies with 47 CFR
Parts 2 and 15 of the FCC rules.
Note: This device is for indoor use only.
INDUSTRY CANADA (IC)
This Class B digital device complies with CAN ICES-3 B/NMB-3 B.
Cet appareil numérique de la classe B est conforme à la norme CAN ICES-3
B/NMB-3 B.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet
appareil doit accepter toute interférence, y compris celles pouvant causer un
mauvais fonctionnement de l'appareil.
RADIATION EXPOSURE STATEMENT
The device meets the exemption from the routine evaluation limits in section 2.5
of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs
peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
This Class B digital device complies with CAN ICES-3 B/NMB-3 B.
Cet appareil numérique de la classe B est conforme à la norme CAN ICES-3
B/NMB-3 B.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet
appareil doit accepter toute interférence, y compris celles pouvant causer un
mauvais fonctionnement de l'appareil.
RADIATION EXPOSURE STATEMENT
The device meets the exemption from the routine evaluation limits in section 2.5
of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs
peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
The exclamation point, within an equilateral triangle, is intended to alert
the user to the presence of important installation, servicing, and
operating instructions in the documents accompanying the equipment.
operating instructions in the documents accompanying the equipment.
This symbol indicates that dangerous voltage levels are present within
the equipment. These voltages are not insulated and may be of sufficient
strength to cause serious bodily injury when touched. The symbol may
also appear on schematics.
strength to cause serious bodily injury when touched. The symbol may
also appear on schematics.
CARING FOR THE ENVIRONMENT BY RECYCLING
When you see this symbol on an ARRIS product, do not dispose of the
product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for information
about practices established for your region. If collection systems are not
available, call ARRIS Customer Service for assistance.
product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for information
about practices established for your region. If collection systems are not
available, call ARRIS Customer Service for assistance.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY
BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION
(“SOFTWARE”) PROVIDED WITH THE ARRIS DIGITAL CABLE RECEIVER OR HOME
THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS LICENSE AS A
“RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF THE SOFTWARE,
YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE.