Furuno USA Inc 9ZWFM3000 Manuale Utente

26

5.DSC Operation

Transmit a Position Report call when you want to anounce
your own position to a specific ship and to get answer, etc.

q Push [DSC/ENT] to enter the DSC menu.
w Rotate  [CHANNEL] to select “POS  Report,” push

[DSC/ENT].

e Rotate [CHANNEL] to select the desired pre-programmed

individual address or “Manual  Input,” push
[DSC/ENT].

• The ID code for the Position Report call can be set in advance.

(p. 13)

• When “Manual  Input” is selected, set the 9-digit ID code

(1st digit must not be ‘0’) for the individual you wish to call by
using [CHANNEL].

- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push [DSC/ENT] to set the ID code.

When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is

connected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)

Sel Address

 Ricky

 Manual Set

˘Tom

Sel Item
 All ships
 POS Request
˘POS Report

r The position information appears. Set the current posi-

tion, push [DSC/ENT].

• Edit the digit of your position data by using [CHANNEL].

- Push [CH/WX] or [SCAN] for cursor movement.
- After editing latitude data, select “N”; North latitude or “S”;

South latitude.

- After editing longitude data, select “E”; East longitude or “W”;

West longitude.

- Push [HI/LO] to clear the position data.

t The time information appears. Set the current UTC time,

push [DSC/ENT].

• Edit the digit of the current UTC time by using [CHANNEL].

- Push [CH/WX] or [SCAN] for cursor movement.
- Push [HI/LO] to clear the time data.

Input time
UTC  4 :

Null˘[H/L]

Input POS
4  °  .   

-

  °  .   

Null˘[H/L]