Furuno USA Inc 9ZWRTR081A Manuale Utente

1. MOUNTING 

The monitor unit can be flush mounted in a console panel, or mounted on a desktop using 

the optional accessories. The optimal viewing distances for the radar display units are: 

MU-170C: 920 mm, MU-201CR: 1080 mm, MU-231CR: 1200 mm. 

 

When selecting a mounting location, keep in mind the following points: 
•  Select a location where the display unit can be viewed conveniently and where the 

screen can be viewed while facing towards the bow. 

•  Locate the unit out of direct sunlight and away from heat sources because of heat that 

can build up inside the cabinet. 

•  Locate the equipment away from places subject to water splash and rain. 
•  Leave sufficient space on the sides and rear of the unit to facilitate maintenance.   
•  A magnetic compass will be affected if the monitor unit is placed too close to the magnetic 

compass. Observe the compass safe distances on page ii to prevent deviation of a 

magnetic compass. 

 

Follow the procedure below to mount the monitor unit in a console panel. 

 

1.  Make cutout in mounting location referring to the outline drawing shown below. 

2.  Insert the monitor unit to the hole and fix it by four tapping screws (6x30). 

3.  Attach panel hooks near the fixing holes. These are used to pull out the monitor unit 

from a console panel for servicing. 

4.  Attach four panel covers to the fixing holes. 

570+1

4-

φ

9 FIXING HOLES

598

(96)

313+1

505

4-FIXING HOLES

554

471

313+1

570+1

30

80

Monitor unit MU-231CR