Anoto Korea Corp. ADP-611 Manuale Utente

■

 User can do Bluetooth pairing with simple steps once the pen already registered as

bluetooth device

■

 Search the app. named PenHub using the keyword “ADP-611” in Google Play and please

download and install the PenHub.

■

 Supported OS version

   - The PenHub can work under Android OS ver. 3.0(Honey comb) to 4.4(Kitkat) with BLE H/W

1. Run the PenHub application

2. Put the ADP-611 to search mode by turn-off and turn-on again.

3. Click the option button

4. Click the Pen connection button 5. Tab the “Pen connection(Auto)”

6. Select the ADP-611

9. Please turn off and on after Bluetooth pairing(Registering)

7. Input the PIN code as “0000”

8. Done the pairing

■

 Check the connection between the pen and the Android mobile device. The green LED keeps

turn-on status when the pen is connected correctly

■

 User can write a pen to exclusive notes or can view the saved note on the Android mobile device

■

 Transmission in real time : Real time transmission the written contents by the digital pen from 

  exclusive notes to the Android mobile device or computer in real time.

■

 Transmission after saving  : The digital pen can save the written contents when it is not paired in Bluetooth.

NOTE)  To save the written contents, the pen should keep the turn-on status when it is written but it is no 
              problem to save when the pen is not paired with Bluetooth.

1. Top LED(RED) : Blinking : Warning the low battery or memory full

Keep on : Warning the discharged battery level or pen working error

2. Top LED(GREEN) : Blinking : Transmission after saving / Keep on : Transmission in real time

1.Click the option button

3. Select your device

4. Message for success to 

    connect between the pen

    and the Android mobile device.

2. Click the Pen connection

button

Function and Mode

11

11

11

01. Do not disassemble or otherwise attempt to change the form of the Digital Pen 611.

02. Do not crush, puncture or shred the Digital Pen 611.

03. Do contact the C/S center when the Digital pen doesn’t work.

04. Do not insert any other writing thing except supplied refill

05. The pen is not working under

          - turned off

          - exceeded from the operation degree

          - put hand or something over the front of the pen(optical sensor)

06. Do not choke down the pen cap or refill.

07. Do pay attention not to get pierced by a refill

08. Do not let the pen come in contact with liquids and do not dry with heater by force

09. Do not place the pen in or near a heat source.

10. Do use the pen in the condition of room temperature.

11. Do not use the chemicals such as alcohol to clean the pen. Do use a piece of soft cloth.

12. Do not use incompatible charger. Misuse or use of incompatible charging device could

result in damage to the equipment and a possible risk of fire, explosion, or leakage, 

leading to serious injuries, damages to your pen.

* Wireless device encountered interference from other devices.

* Don’t attempt to use the battery improperly or replace yourself – you may damage the battery,

which could cause overheating and injury.

* Do dispose of the battery in accordance with local regulations. Never dispose of battery in a fire

because it may explode.

Unpacking

Specification

Caution