ICOM 217800 Manuale Utente

24

3

BASIC OPERATION

The triple band stacking register provides 3 memories
in one band. 3 sets of a frequency and operating mode
on each band are automatically stored when used.

If a band key is pushed once, the frequency and oper-
ating mode last used are called up. When the key is
pushed again, another stored frequency and operating
mode are called up.

This function is convenient when you operate 3 oper-
ating modes on one band. For example, one register
is used for a CW frequency, another for an SSB fre-
quency and the other one for an RTTY frequency.

See the table below for a list of the band available and
the default settings for each band.

Band keys

■

1.8 MHz

1.900000 MHz CW

1.910000 MHz CW

1.915000 MHz CW

3.5 MHz

3.550000 MHz LSB

3.560000 MHz LSB

3.580000 MHz LSB

7 MHz

7.050000 MHz LSB

7.060000 MHz LSB

7.020000 MHz CW

10 MHz

10.120000 MHz CW

10.130000 MHz CW

10.140000 MHz CW

14 MHz

14.100000 MHz USB

14.200000 MHz USB

14.050000 MHz CW

18 MHz

18.100000 MHz USB

18.130000 MHz USB

18.150000 MHz USB

21 MHz

21.200000 MHz USB

21.300000 MHz USB

21.050000 MHz CW

24 MHz

24.950000 MHz USB

24.980000 MHz USB

24.900000 MHz CW

28 MHz

28.500000 MHz USB

29.500000 MHz USB

28.100000 MHz CW

50 MHz

50.100000 MHz USB

50.200000 MHz USB

51.000000 MHz FM

General

15.000000 MHz USB

15.100000 MHz USB

15.200000 MHz USB

q Push [(14)5], then select a frequency and an oper-

ating mode.

• Frequency and operating mode are memorized in the

first band stacking register.

w Push [(14)5] again, then select another frequency

and operating mode.

• This frequency and operating mode are memorized in

the second band stacking register.

e Push [(14)5] again, then select another frequency

and operating mode.

• This frequency and operating mode are memorized in

the third band stacking register.

• When a fourth frequency and operating mode are se-

lected on a band, the first register set in step q, is over
written.

[Example]: 14 MHz band

D

D