ICOM 242700 Manuale Utente

69

4

RECEIVE AND TRANSMIT

■ TV channel operation

qPush and hold [AF(

)] for 1 sec. to turn the TV

mode ON.

• Push and hold 

)] for 1 sec again to exit the TV

mode.

wRotate [M-ch] (inner) control to select the desired

TV channel.

•

Y(

)]/[

Z(

)] keys also select the TV channel.

• The popup indicator appears and shows the selected

channel number. (The popup indicator can be turned
OFF in the display set mode. p.128)

ePush [P.AMP/ATT] momentarily to turn the preamp

ON and OFF; push and hold for 1 sec. to turn the
12 dB attenuator ON.

• The popup indicator, “

” or “

,” appears

when the preamp is ON or attenuator is ON, respec-
tively. (The popup inidicator can be turned OFF in the
display set mode. p. 128)

• Each channel can store the preamp or attenuator

ON/OFF conditions independently.

• Only one of these functions can be activated at a time.

rRotate [AF] to set a suitable audio level.

WARNING! NEVER

watch a TV program while

driving a vehicle. Safe driving requires your full at-
tention–anything less may result in an accident.

[

Y]

[

Z]

[P.AMP/ATT]

[AF]

[M-ch]

DConvenient functions for receive

• Preamp and attenuator (p. 74)

➥ Push [P.AMP/ATT] momentarily to turn the pre-

amp ON or OFF.

• “

” appears when the preamp is set to ON.

➥ Push [P.AMP/ATT] for 1 sec. to set the attenua-

tor ON.

• Push

[P.AMP/ATT] momentarily to turn the attenuator

OFF.

• “

” appears when the attenuator is set to ON.