ICOM 242700 Manuale Utente

87

6

FUNCTIONS FOR TRANSMIT

DFull break-in operation

DSemi break-in operation

■ Break-in function

During semi break-in operation, the transceiver se-
lects transmit when keying, then automatically returns
to receive after a pre-set time from when you stop
keying.

qPush [MODE] to select CW or CW-R mode.

wSelect M-3.

ePush [F-1 BRK] once or twice to turn the semi

break-in function ON.

• “

” appears.

When using a paddle, set “Key  Speed” in the
quick set mode to adjust the keying speed. (p. 124)

qPush [MODE] to select CW or CW-R mode.

wSelect M-3.

ePush [F-1 BRK] for 1 sec. to enter the break-in

delay time set mode.

rRotate [DIAL] to set the break-in delay time (the

delay from transmit to receive).

[MENU/GRP]

[F-1]

[DIAL]

[MENU/GRP]

[F-1]

Appears

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group M.

• Push

[MENU/GRP] momentarily one or more times to

select the menu M-3.

During full break-in operation, the transceiver auto-
matically switches to receive between keying dots
and dashes so that the operator can hear activity on
the channel when transmitting.

qPush [MODE] to select CW or CW-R mode.

wSelect M-3.

ePush [F-1 BRK] once or twice to turn the semi

break-in function ON.

• “

” appears.

When using a paddle, set “Key  Speed” in the
quick set mode to adjust the keying speed. (p. 124)

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group M.

• Push

[MENU/GRP] momentarily one or more times to

select the menu M-3.

[MENU/GRP]

[F-1]

Appears

The break-in function is used in CW mode to automat-
ically switch the transceiver between transmit and re-
ceive when keying. The IC-7000 is capable for full
break-in or semi break-in.