ICOM 262200 Manuale Utente

11

3

■SmarTrunk II™ and 

This transceiver is capable of SmarTrunk II™ functions.

The optional UT-105 allows communication in conventional
channels or SmarTrunk II™ channels. Select a channel bank
for SmarTrunk II™ before trunking operation.

• Push [

] several times to select a channel bank for con-

ventional channels or SmarTrunk II™ channels.

- Scanning starts when a channel bank for SmarTrunk II™ opera-

tion is selected.

- Contact your dealer for channel bank details.

NOTE: Optional HM-100TN DTMF MICROPHONE is
required. Contact your dealer for details.

■SmarTrunk II™ operation

These features are enabled by a dealer and may not be avail-
able in your system. Contact your dealer for details.

D Placing a telephone call

Enter the phone number followed by [1], [M].

• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to talk, and

release it to listen.

D Calling another local system subscriber

Enter the subscriber number followed by [3], [M].

• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber

answers.

• If the other subscriber is on another call or out of range, you hear a

fast busy signal and the call terminates automatically.

D Receiving a call

When you hear ringing, push [M] to answer.

• For a group call, you hear a short ring followed by two short beeps.

You do not have to answer a group call to hear it over the air.

IC-F111_F121_F211_F221.qxd  02.12.26 6:17 PM  Page 11 (1,1)