ICOM 262200 Manuale Utente
i
IMPORTANT
EXPLICIT DEFINITIONS
RWARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
shock.
CAUTION! NEVER
touch the transceiver (especially
the heat sink) when transmitting continuously for long peri-
ods. It will become hot.
ods. It will become hot.
NEVER
connect the transceiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.
the transceiver.
NEVER
cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.
the transceiver might be damaged.
NEVER
place the transceiver where normal operation of
the vehicle may be hindered or where it could cause bodily
injury.
injury.
NEVER
allow children to touch the transceiver.
NEVER
expose the transceiver to rain, snow or any liquids.
PRECAUTION
WORD
DEFINITION
RWARNING
Personal injury, fire hazard or electric shock
may occur.
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
of personal injury, fire or electric shock.
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL —
This
instruction manual contains important operating instructions
for the IC-F111/F121 VHF TRANSCEIVER and IC-F211/F221
UHF TRANSCEIVER.
for the IC-F111/F121 VHF TRANSCEIVER and IC-F211/F221
UHF TRANSCEIVER.
Icom, Icom Inc. and the
logo are registered trademarks of
Icom Incorporated (Japan) in the United states, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
SmarTrunk II™ is a trademark of the SmarTrunk Systems, Inc.
Kingdom, Germany, France, Spain, Russia and/or other countries.
SmarTrunk II™ is a trademark of the SmarTrunk Systems, Inc.
IC-F111_F121_F211_F221.qxd 02.12.26 6:17 PM Page i (1,1)