ICOM 262200 Manuale Utente

5

1

PANEL DESCRIPTION

¡

¡ OUTPUT POWER SELECTION KEYS

Select the transmit output power temporarily, or
permanently, depending on the pre-setting.

• Contact your dealer for the output power level for each

selection.

¡

¡ TALK AROUND KEY

Turns the talk around function ON and OFF.

• The talk around function equalizes the transmit fre-

quency to the receive frequency for mobile-to-mobile
communication.

¡

¡ WIDE/NARROW KEY

Push this key to toggle the bandwidth between
wide or narrow.

¡

¡ DTMF AUTODIAL KEY

Push this key to display the text of the DTMF
channel number and set the desired channel
number via the [

]/[

] key. Then, push this

key again to transmit a specified DTMF code.

¡

¡ CALL KEY

Transmit a 2-tone, 5-tone code.

• Call transmission is necessary before you call another

station depending on your signaling system.

• The  [CAL A] and/or [CAL B] keys may be available

when your system employs selective ‘Individual/Group’
calls. Contact your dealer about which call is assigned
to each key.

¡

¡ EMERGENCY KEY

Push and hold the key to transmit an emergency call.

• If you want to cancel the emergency call, push and

hold (or push) the key again before transmitting the
call.

• Depending on the pre-setting, the emergency call is

transmitted one time only, or repeatedly, until receiving
a control code.

¡

¡ HOOK SCAN

When the Hook Scan function is turned ON, push
this key to stop scanning temporarily. Push this
key again to re-start scanning.

¡

¡ TX CODE KEY

Select a transmit 5-tone code (station code) chan-
nel.

IC-F111_F121_F211_F221.qxd  02.12.26 6:17 PM  Page 5 (1,1)