ICOM 268500 Manuale Utente
8
3
BASIC OPERATION
New2001
■ Call channel programming
The call channel is used to select Channel 9, however, you
can program your most often-used channels in each channel
group for quick recall.
can program your most often-used channels in each channel
group for quick recall.
q Push both [Y] and [Z] one or more times to select the de-
sired channel group (U.S.A., International, Canada) to be
programmed.
programmed.
w Push [16•
9
] for 1 sec. to se-
lect the call channel of the
selected channel group.
selected channel group.
• “CALL” and call channel
number appear.
e Push [16•
9
] again for 3
sec. (until a long beep
changes to 2 short beeps)
to enter call channel pro-
gramming condition.
changes to 2 short beeps)
to enter call channel pro-
gramming condition.
• Channel number starts
blinking.
r Push [Y]/[Z] to select the
desired channel.
t Push [16•
9
] to program
the displayed channel as
the call channel.
the call channel.
• Push [CH/WX
•DUAL
] to can-
cel.
• The channel number stops
blinking.
■ Channel names
Memory channels can be tagged with alphanumeric names
of up to 10 characters each.
of up to 10 characters each.
Capital letters, small letters (except f, j, p, s, y, x, z), 0 to 9,
some symbols (=
some symbols (=
✱ + – . /) and space can be used.
q Select the desired memory channel.
• Cancel dual watch, tri-watch or scan in advance.
w While pushing [CH/WX•
DUAL
], push [16•
9
] to edit
the channel name.
• A cursor and the first char-
acter starts blinking alter-
nately.
nately.
e Select the desired character by pushing [Y]/[Z].
r Push [CH/WX•
r Push [CH/WX•
DUAL
] or [16•
9
] for cursor movement.
t Repeat steps e and r to input all characters.
y Push [DSC•
y Push [DSC•
POS
] to set the channel name.
u Repeat steps q to y to program other memory channel
names, if desired.
■ Microphone lock function
The microphone lock function electrically locks the [Y]/[Z]
and [HI/LO] switches on the supplied microphone. This pre-
vents accidental channel changes and function access.
➥ While pushing [HI/LO] on the microphone, turn power ON
and [HI/LO] switches on the supplied microphone. This pre-
vents accidental channel changes and function access.
➥ While pushing [HI/LO] on the microphone, turn power ON
to toggle the lock function ON and OFF.
!IC-M302_draft.qxd 03.9.1 6:02 PM Page 8 (1,1)