ICOM 269800 Manuale Utente

39

7

SCAN OPERATION

■ Scan edges programming

Scan edges can be programmed in the same manner as
memory channels. Scan edges are programmed into scan
edges, 1A/1b to 3A/3b, in memory channels.

q Set the edge frequency of the desired frequency range in

VFO mode:
➥ Set the frequency using [DIAL].

➥ Set other data (e.g. repeater settings, etc.) if desired.

w Push [S.MW

] momentarily.

• “M” indicator and channel number blink.

e Rotate [DIAL] to select one of scan edge channel, 1A, 2A

or 3A.

r Push [S.MW

] for 1 sec. to program.

• 3 beeps sound and VFO is automatically selected.
• Scan edge 1b, 2b or 3b is automatically selected when continu-

ing to push [S.MW

] after programming.

t To program a frequency for the other pair of scan edges,

1b, 2b or 3b, repeat steps q and r.

• If the same frequency is programmed into a pair of scan edges,

programmed scan will not function.

[EXAMPLE]: Programming 145.300 MHz into scan edges 1A.

(   )

Push

Rotate            for setting frequency, etc.

Push          momentarily.

Rotate

Push          for 1 sec. 
and continue to push 

➠

Beep

Beep

Beep

“

“

“

“

“