ICOM 269800 Manuale Utente

48

10

■ Pocket beep operation

This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called while you were away from the transceiver.

D Waiting for a call from a specific station

q Set the operating frequency.
w Push [SET

] to enter set mode.

e Push [SET] or [MONI] several times until “Ct” for tone

squelch or “dt” for DTCS squelch appears.

r Rotate [DIAL] to select the desired tone squelch frequency

or DTCS code.

t When operating the pocket beep function with DTCS

squelch, push [SET] once then rotate [DIAL] to select the
DTCS polarity.

y Push any other key than [SET] or [MONI] to exit set mode.

u Push [TONE

] several times until “

” or “

”

are displayed to turn ON the pocket beep with tone
squelch or DTCS squelch, respectively.

i When a signal with the matched tone is received, the

transceiver emits beep tones and blinks “ ”.

• Beep tones sound for 30 sec. and “ ” blinks. To stop the beeps

and blinking manually, push any key. When the beep tones are
not stopped manually, “ ” continues flashing until step 

i is 

operated.

o Push [PTT] to answer.

• “ ” disappears and cancels the pocket beep function automati-

cally.

!0 Push [TONE

] several times until “ ” or “

” dis-

appears to cancel the tone squelch or DTCS squelch func-
tion.

Appears when the pocket beep 
with tone squelch is activated.

Appears when the pocket beep
with DTCS squelch is activated.

DTCS polarity setting

Tone squelch frequency setting

DTCS code setting