ICOM 270600 Manuale Utente
6
BASIC OPERATION
New2001
3
■ Channel selection
ï
ï Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
Dualwatch and Tri-watch. While standing by, you must moni-
tor Channel 16.
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
Dualwatch and Tri-watch. While standing by, you must moni-
tor Channel 16.
➥ Push [16•
9
] momentarily to select Channel 16.
➥ Push [CH/WX•
DUAL
] to return to the condition before select-
ing Channel 16, or push [Y] or [Z] to select operating chan-
nel.
nel.
ï
ï Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during Tri-watch. The
call channels can be programmed (p. 9) and are used to store
your most often used channels in each channel group for
quick recall.
channel. The call channel is monitored during Tri-watch. The
call channels can be programmed (p. 9) and are used to store
your most often used channels in each channel group for
quick recall.
➥ Push [16•
9
] for 1 sec. to select the call channel of the se-
lected channel group.
• “CALL” and call channel number appear.
• Each channel group may have an independent call channel after
• Each channel group may have an independent call channel after
programming a call channel. (p. 9)
➥ Push [CH/WX•
DUAL
] to return to the condition before se-
lecting call channel, or push [Y] or [Z] to select an oper-
ating channel.
ating channel.
Push
for 1 sec.
Push
!IC-M402A_SA_draft.qxd 03.10.20 11:41 AM Page 6 (1,1)