ICOM 277602 Manuale Utente

11

2

PANEL DESCRIPTION

MONITOR KEY
 ➥ Push to mute and release the CTCSS (DTCS) or 2Tone* squelch

mute. Open any squelches/deactivate any mutes while pushing
this key.

 (LMR operation only)

 * Available for the IC-F3013/F4013 only.

➥

Activates one of (or two of) the following functions on each chan-

nel independently:

 (PMR operation only)

 • Push and hold to un-mute the channel (audio is emitted; ‘Audible’).
 • Push to mute the channel (audio is not emitted; ‘Inaudible’).
 • Push to send a ‘reset code’ after the communication is finished.

 

NOTE: The un-mute condition (‘Audible’ condition) may auto-
matically return to the mute condition (‘Inaudible’ condition)
after a specified period.

D For IC-F3013/IC-F4013 only

DTMF AUTODIAL KEY
Push to transmit the programmed DTMF code.

CALL KEYS
Push to transmit a 2/5-tone code.

• Call transmission is necessary before you call another station depend-

ing on your signalling system.

• [Call A] and/or [Call B] keys may be available when your system em-

ploys selective ‘Individual/Group’ calls. Ask your dealer which call is
assigned to each key.

EMERGENCY SINGLE/EMERGENCY REPEAT KEYS
➥

  Push and hold for the specified time period to transmit an emer-

gency call once or repeatedly.

➥

  When 

[Emergency Single (Silent)] or [Emergency Repeat (Silent)] 

is pushed, an emergency call is transmitted with no beep emission.

 • If you want to cancel the emergency call, push (or push and hold)

the key again before transmitting the call.

 • The emergency call is transmitted one time only or repeatedly until

receiving a control code depending on the pre-setting.