Manualsbrain.com
  1. Manuali
  2. Marche
  3. ICOM
  4. 279100
  5. Manuale Utente

ICOM 279100 Manuale Utente

Scarica
Pagina di 44
14
4
MEMORY OPERATION
 
■
Memory names
 
ï
Programming memory names
The memory channel can display a 6-character name in-
stead of the programmed frequency.
q 
 In the frequency mode, rotate [DIAL] to select the desired 
frequency in the frequency mode.
w 
 Push 
, then push [MR•
MW
] to program the contents 
into the selected memory channel.
e 
 Rotate [DIAL] to select the desired memory channel to be 
programmed.
 
•   Push 
, then push [0•
BANK
], and rotate [DIAL] to select the 
BANK number, if desired. Push [CLR•
DEL
] to exit the BANK se-
lection mode.
r 
 Push  [MR•
MW
] to enter the memory name programming 
mode.
  • “-- -- -- -- -- -- ” appears on the display.
t 
 Push the appropriate digit key several times to select the 
desired character, as listed to the right.
  • To erase a character, overwrite with a space (displayed as _).
  •  To move the cursor forwards or backwards, use [DIAL].
y 
 Push  [ENT•
WX
] to program the name.
  • The memory name stops flashing.
  •  When no name is programmed, the display shows the operat-
ing frequency.
  •  To clear the entered memory names, push [CLR•
DEL
] before 
pushing [ENT•
WX
].
NOTE: When programming the memory name to the pro-
grammed memory channel do the following.
q 
 Follow the same steps as in “Transferring memory con-
tents” (see p. 12).
w 
 Follow  steps  w–y in “Programming memory names” 
(see left column).
 
■
Clearing the memory contents
Unwanted memory channels can be cleared.
q
  Select the memory channel to be cleared.
w
   Push 
, then hold down [CLR•
DEL
] for 1 second.
  •  “-- -- -- -- -- --” appears momentarily, then the next selectable 
channel appears.
 Key  Character  Key  Character  Key 
Character
  1 
1, Q, Z 
2 
2, A, B, C 
3 
3, D, E, F
  4 
4, G, H, I 
5 
5, J, K, L 
6 
6, M, N, O
  7 
7, P, R, S 
8 
8, T, U, V 
9 
9, W, X, Y
 ENT 
Program 
0 
0, space, -