ICOM 279501 Manuale Utente

26

10

■ MB-86 contents

Qty.

Belt clip ………………………………………………………… 1
Base clip ……………………………………………………… 1
Supplied screws ……………………………………………… 2

■ Attachment

q Screw the supplied 2 screws to fix the base clip with the

back of the transceiver as illustrated below.

w Clip the belt clip to a part of your belt and insert the trans-

ceiver into the belt clip until the base clip fitting into the
groove.

e Once the transceiver is locked in place, it swivels as illus-

trated below.

■ Detachment

➥ Turn the transceiver upside down in the direction of the

arrow and pull out from the belt clip.

Supplied screws

R

R CAUTION!

HOLD THE TRANSCEIVER TIGHTLY, WHEN HANGING
OR DETACHING THE TRANSCEIVER FROM THE BELT
CLIP.
Otherwise the transceiver may not be attached to the belt
clip or swivelled properly if the transceiver is accidentally
dropped and the base clip is scratched or damaged.

IC-M90.qxd  04.8.23  3:54 PM  Page 26