ICOM 280401 Manuale Utente

20

4

BIIS OPERATION

D

D Group call

q When a group call is received;

• Beeps sound.
• “

” appears and the mute is released.

• The programmed text message (e.g.“GROUP”) and the calling sta-

tion ID (or text) is displayed when the indication mode is 2 lines.

• The programmed text message (e.g.“GROUP”) and the calling

station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.

• “

” appears or blinks depending on the setting.

w Push and hold [PTT], then speak into the microphone at a

normal voice level.

• TX indicator lights red.

NOTE: Only one station is permitted to speak.

e Release [PTT] to return to receive.

• BUSY indicator lights green while receiving a signal.

r To finish the conversation, push [MONITOR] (Moni(Audi))

to send the ‘Clear down’ signal.

• Either station can send a ‘Clear down’ signal.
• “CLR DOWN” is displayed for 2 sec. (approx.)

• “

” disappears and the transceiver returns to the standby con-

dition.

D

D Displaying the received call record

The transceiver memorizes the calling station ID in the mem-
ory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.

q Push [P1] (Digital) for 1 sec.

• Displays following indication.

w Push [Up] or [Down] to select the desired call.
e Push [P1] (Digital) for 1 sec. again to return to the standby

condition.

• When no operation is performed for 30 sec., the transceiver

returns to the standby condition automatically.

X

X

X

Appears Appears or blinks

!IC-F70_F80.qxd  04.11.9 0:02 PM  Page 20 (1,1)