ICOM 283300 Manuale Utente

7

2

PANEL DESCRIPTION

❍ While in the digital (DV) mode operation with the in-

stalling an optional Digital unit UT-118.
➥ “ ” appears while the digital code (CSQL) squelch

function is in use. (p. 47)

➥ “ ” appears while the call sign (DSQL) squelch func-

tion is in use. (p. 47)

➥ “ ” appears with the “ ” or “ ” indicator while the

pocket beep function (CSQL or DSQL) is in use.
(p. 46)

y

(p. 15)

Appears during transmit.

u

Shows operating frequency, channel number or channel
names, depending on display type (p. 16). 

i

➥ Shows receiving signal strength as below. 

➥ Shows the output power level while transmitting. 

o

➥ Appears when a signal is being received or the squelch

is open. 

➥ Blinks while the monitor function is activated. (pgs.15,

47)

!0

(p. 39)

Blinks when a pager call is received. (This indicator ap-
pears only when UT-108 is installed.)

!1

(p. 43)

Appears when digital mode is selected. (This indicator ap-
pears only when UT-118 is installed.)

!2

(p. 15)

➥ “L” or “M” appears when the low or middle output power

is selected, respectively.

➥ No indicator appears when high output power is se-

lected.

!3

(p. 30)

Appears when the selected memory channel is specified
as a skip channel.

!4

(p. 20)

Appears while in memory mode or channel number indica-
tion mode.

!5

(p. 20)

➥ Shows the selected memory channel number.

➥ “C” appears when the call channel is selected.

Low

Middle

High

Weak 

⇐

 RX Signal level 

⇒

 Strong