ICOM 283300 Manuale Utente

Pagina di 88
10
3
BATTERY PACKS
Battery charging
D
Regular charging with the BC-146
The optional BC-146 provides regular charging of an optional
NI-Cd battery pack with/without transceiver. The following is
additionally required:
• An optional AC adapter. (An AD-99N is supplied with BC-146.)
D
About AD-99N
The adapter (Spacer A) only is required for IC-V82/U82 se-
ries. When removing the spacer (Spacer B/C), push the notch
carefully with your finger to remove the spacer (Spacer B/C)
from the adapter (Spacer A).
R
CAUTION!
DO NOT
push or force the notch with a screw driver, etc.,
to remove it.
DO NOT
bend the notch when the adapter and spacer are
not joined together. This will cause weakening of the notch
plastic.
Both cases may break the notch and it may not be able to
be reattached.
Push the notch
carefully.
Remove the spacer (Spacer B/C) 
from the adapter.
Check orienta-
tion for correct 
charging. (In-
sert together 
with  AD-99N.)
Turn power OFF.
BC-146 +AD-99N
• Chargeable battery
  BP-209N, BP-222N 
Recommendation:
Charge the BP-211N (Li-Ion) by BC-119N (or BC-121N) for
a maximum of 2 hours. Li-Ion batteries are different from Ni-
Cd batteries in that it is not necessary to completely charge
and discharge them to prolong the battery life. Therefore,
charging the battery in intervals, and not for extended peri-
ods is recommended.