ICOM 283300 Manuale Utente

43

11

DIGITAL MODE OPERATION

■

q Set the desired frequency in VFO mode. (pgs. 13, 14)

• Select output power, if desired. (p. 15)

w Push 

then 

for enter 

OPTION SET MODE

,

then push 

Y

Y

or 

Z

Z

several times to select the digital se-

lect mode.

• “DG” appears.

e Rotate 

to turn the digital mode ON.

r Push 

Y

Y

once to select the your call sign select mode.

• “myC” appears.

t Push 

for 1 sec. then rotate 

to select the de-

sired your call sign channel, if you have programmed sev-
eral call signs.

• After selecting the your call sign, push

to return to 

OP

-

TION SET MODE

.

D

D

(continued from step t) 

y Select “CQ” as the call sign.

- Push 

Y

Y

or 

Z

Z

several times to select the call sign se-

lect mode.

• “yUC” appears.

- Push 

for 1 sec. then rotate 

to select the de-

sired channel.

- Push 

for 1 sec. to set “CqCqCq.”

- Push 

✱

(or 

) to exit 

OPTION SET MODE

.

u Push and hold 

to transmit and speak into the micro-

phone at normal voice level.

• Transmit indicator appears and the RF meter shows the output power.

i Release 

to return to receive.

• The other station call sign will be received.
• Received call signs can be stored into the received call record

automatically. See page 44 for details.

In the digital mode operation; when “BUSY” indi-

cator appears but no sound comes out the speaker, it
may be caused by the interference of FM mode. In this
case, to prevent interference of FM mode, set the digital
monitor setting (p. 47) to “An(analog)” then listen on the
channel before transmitting by pushing 

.

Appears