ICOM 288800 Manuale Utente

MENU SCREEN OPERATION

D Memory bank link function

Sets the memory bank link function ON

(default)

and OFF. The

link function provides continuous bank scan, scanning all con-
tents in the selected banks during bank scan.

• Bank link setting
q Rotate [DIAL]

†

to select the bank that you want to change

setting.

w Push [5/SKIP](ï)

†

to enter the bank setting condition.

e Rotate [DIAL]

†

to select the setting.

r Push [5/SKIP](ï)

†

to set and return to the BANK LINK

screen.

t Rotate [DIAL]

†

to select next bank and repeat steps w to

r, or push [MENU/LOCK] to exit scan set mode.

■ DUP/TONE set mode items

D Offset frequency

Sets the offset frequency for duplex

(repeater)

operation within

0 to 159.995 MHz range.

The default value may differ according to the selected fre-
quency band

(before accessing DUP/TONE set mode)

and trans-

ceiver version.

The selected tuning step in VFO mode is used for setting
the offset frequency.

D Repeater tone frequency

Selects subaudible tone frequency for accessing a repeater,
etc. Total of 50 tone frequencies

(67.0–254.1 Hz)

are available.

(default: 88.5)

88.5

REPEATER TONE

254.1

REPEATER TONE

0.000.00

OFFSET FREQ

159.995.00

OFFSET FREQ

OFF

BANK-A

OFF

BANK-A

BANK-A:ON

BANK-D:ON

BANK-C:ON

BANK-B:ON

BANK-E:ON

BANK LINK

BANK-V:ON

BANK-Y:ON

BANK-X:ON

BANK-W:ON

BANK-Z:ON

BANK LINK