ICOM 288800 Manuale Utente
56
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
■ EMR communication
The EMR communication mode is available for digital mode
operation. In the EMR communication mode, no call sign set-
ting is necessary. When an EMR communication mode sig-
nal is received, the audio (voice) will be sound in the specified
level even the volume setting level is set to minimum level.
operation. In the EMR communication mode, no call sign set-
ting is necessary. When an EMR communication mode sig-
nal is received, the audio (voice) will be sound in the specified
level even the volume setting level is set to minimum level.
q Set the desired frequency in 144 or 440 MHz band then
push and hold [•/EMR/DTMF] until 3 short and 1 long
beeps sound to turn the EMR setting ON.
beeps sound to turn the EMR setting ON.
• “EMR” appears
w Operate the transceiver normal way.
e To cancel the EMR communication mode, push and hold
e To cancel the EMR communication mode, push and hold
[•/EMR/DTMF] for 1 sec. to turn OFF.
■ Slow-speed data communication
In addition to the digital voice communication, a slow-speed
data communication is available.
The optional OPC-1529
data communication is available.
The optional OPC-1529
DATA COMMUNICATION CABLE
and a
slow-speed data communication application
(purchase locally)
are required additionally.
The optional RS-91
The optional RS-91
REMOTE CONTROL SOFTWARE
(OPC-1529
supplied)
also includes a slow-speed data communication ca-
pability.
D
D Connection
Connect the transceiver to your PC using with the optional
OPC-1529 as illustrated below.
OPC-1529 as illustrated below.
OPC-1529
(optional)
(optional)
to [DATA]
jack
jack
to
RS-232C
RS-232C
EMR
EMR
DV
DV
B
430 712
PSKIP
PSKIP
50
Appears