ICOM 288800 Manuale Utente
64
MEMORY/CALL CHANNELS
8
■ General description
The IC-91A/91AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
bands. Memory channels in each bands including 50 scan
edge memory channels (25 pairs) for storage of often-used
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in each
bands for storing groups of frequencies, etc. Up to 100 chan-
nels can be assigned into a bank.
memory channels in B band, and 2 call channels in each
bands. Memory channels in each bands including 50 scan
edge memory channels (25 pairs) for storage of often-used
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in each
bands for storing groups of frequencies, etc. Up to 100 chan-
nels can be assigned into a bank.
D
D Memory channel contents
The following information can be programmed into memory
channels:
channels:
• Operating frequency (p. ??)
• Operating mode (p. ??)
• Duplex direction (+DUP or –DUP) with an offset fre-
• Operating mode (p. ??)
• Duplex direction (+DUP or –DUP) with an offset fre-
quency (pgs. ??, ??)
• Subaudible tone encoder (p. ??), tone squelch or DTCS
squelch ON/OFF (p. ??)
• Subaudible tone frequency (p. ??), tone squelch fre-
quency or DTCS code with polarity (pgs. ??, ??)
• Scan skip information (p. ??).
• Memory bank (p. ??)
• Memory name (p. ??)
• Tuning step (p. ??)
• Call sign squelch or Digital code squelch* (p. ??)
• Your call sign* (p. ??)
• RPT1/RPT2 call sign* (p. ??)
*Available for B band operation only.
• Memory bank (p. ??)
• Memory name (p. ??)
• Tuning step (p. ??)
• Call sign squelch or Digital code squelch* (p. ??)
• Your call sign* (p. ??)
• RPT1/RPT2 call sign* (p. ??)
*Available for B band operation only.
■ Selecting a memory channel
D
D Using [DIAL]— Programmed channels
q Push [MR/S.MW] to select memory mode.
w Rotate [DIAL] to select the desired memory channel.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed channels are displayed.
D
D Using [DIAL]— All channels
q Push [MR/S.MW] to select memory mode.
w Push and hold [MR/S.MW] for 1 sec. to enter select mem-
w Push and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
• “
• “
µµ ” indicator blinks.
e Rotate [DIAL] to select the desired memory channel.
• All channels are displayed.
[DIAL]
A
µ
FM
FM
146 010
000
000
Appears
Rotate [DIAL] to select
the memory channel.
the memory channel.