ICOM 296400 Manuale Utente
38
8
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Priority watch
Priority watch checks for signals on “priority channels” while
operating on a VFO frequency.
operating on a VFO frequency.
D
Memory or call channel watch
While operating on a VFO frequency, memory or call channel
watch monitors for signals in the selected memory or call
channel every 5 sec.
watch monitors for signals in the selected memory or call
channel every 5 sec.
q Select the desired memory channel or the call channel.
w Push
w Push
[CLR]
to select VFO mode.
e Push
[FUNC]
, then push
[
PRIO
]
(7) to start watching.
• VFO is displayed, then the decimal point “
.
”, on the frequency
readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
tion.
r Push
[CLR]
to stop watching.
D
Memory scan watch
While operating on a VFO frequency, memory scan watch
monitors for signals in each memory channel in sequence,
every 5 sec.
monitors for signals in each memory channel in sequence,
every 5 sec.
q Push
[MR]
to select memory mode, if necessary.
• “X” appears.
w Push
[FUNC]
, then push
[
SCAN
]
(5) to start the memory
scan.
e Push
[FUNC]
, then push
[
PRIO
]
(7) to start the watching.
• VFO is displayed, then the decimal point “
.
”, on the frequency
readout blinks.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
tion.
r Push
[CLR]
to stop the watching.
SKIP
Mch 1
Mch 2
Mch 3
Mch 4
Mch 5
Mch 99
Mch 6
Priority channel
Memory
scan
scan
5 sec.
50 msec.
VFO frequency
5 sec.
50 msec.
VFO frequency
Memory channel