ICOM 297000 Manuale Utente
VIII
QUICK REFERENCE GUIDE
■ Your first contact
Now that you have your IC-2820H installed in your car or
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first “On The Air” an enjoyable experience.
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first “On The Air” an enjoyable experience.
1. Turning ON the transceiver
Before powering up your IC-2820H, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
➥ While pushing both band’s [M/CALL•MW], push and hold
[PWR] for 1 sec. to reset the CPU.
2. Selecting the main band
The IC-2820H displays 2 frequencies on left and right bands
simultaneously. However, transmission, some keys and mi-
crophone’s operation are accepted for the main band only.
simultaneously. However, transmission, some keys and mi-
crophone’s operation are accepted for the main band only.
➥ Push the desired band’s (left or right) [MAIN•BAND] to se-
lect the main band.
• “Q” appears for the main band.
Using the HM-133
You can select the main band from the HM-133.
Push
Push
again
[MAIN•BAND]
[M/CALL•MW]
While pushing both [M/CALL•MW], turn power ON.
[M/CALL•MW]
[PWR]
Set both [VOL] and [SQL] controls to 9–10 o’clock positions.
Quick reference guide